Oypla 3403 User Manual

User Manual

USER MANUAL Model No: 3403

Car Polisher

WARNING

To Reduce The Risk of Fire or Electric Shock,
follow these basic precautions:

Read all instructions before using this tool.
Never allow children to operate or play with this tool.
Never clean this tool with flammable fluids. The fumes can create a fire hazard or explosion.
UNPLUG OR DISCONNECT THIS TOOL FROM THE POWER SUPPLY BEFORE SERVICING.

-Save these instructions-

• The product should only be connected to a 230 V AC, 50 Hz electrical outlet.

• Never leave the product unattended whilst it is switched on.

• If you have to leave the product unattended, even for a short while, always switch

it off.

• Keep the product out of children’s reach and do not allow children to use it.

• Never use near flammable materials or gasses.

• Inspect the mains lead regularly. Never use the product if the mains lead or plug

has been damaged in any way.

• Do not place the mains lead on or near any hot surface.

• Do not touch the product if your hands are moist or wet.

• Always wear eye protection.

• Never attempt to use this polisher as a grinder or sander.

• If the product is damaged or has any defects, please contact [e-mail]

Safety Instructions

Notice: Ensure you read and fully understand instructions before use

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold

on this condition, which no representative of the company can waive or change.

USER MANUAL Model No: 3403

WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and

reduced ability to grip. Long term exposure can lead to a chronic condition. If necessary, limit the
length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands
below a normal comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and frequency of operating
the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions. A
poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration levels in the workplace
that may be useful to domestic users who use tools for long periods of time.