O.Y.L. Technology AX1 LED User Manual

Security

&

Home Automation System

AXI LED

USER MANUAL

(REV. 1.0)

AX1 LED User Manual Rev 1.0

CONTENTS

PREFACE

FEATURES

LED KEYPAD OUTLOOK

1.0 LIGHT INDICATION

CHAPTER 1: ALARM SYSTEM CONTROL

1.0 USING LED KEYPAD

1.0.1 ARMING

1.0.1.1 QUICK ARMING

1.0.2 DISARMING

1.0.2.1 IN ARMED MODE

1.0.2.2 IN ALARM MODE

1.0.3 ALARM REPORT

1.0.4 CLEAR ALARM MEMORY

1.0.5 BYPASSING ZONE

1.0.5.1 QUICK BYPASSING ZONE

1.1 ARM/DISARM USING TELEPHONE

1.1.1 ARM/DISARM WITH VOICE ACTIVE

1.1.2 ARM/DISARM WITH BEEPER

CHAPTER 2: HOME AUTOMATION CONTROL

2.0 INTRODUCTION

2.1 HOME AUTOMATION CONTROL USING LED KEYPAD

1

2

4

6

7

8

9

10

11

12

13

14

AX1 LED User Manual Rev 1.0

2.2 HOME AUTOMATION CONTROL USING TELEPHONE

2.2.1 WITH VOICE ACTIVE

2.2.2 WITH BEEPER

CHAPTER 3: VIEW TIMER MODE

CHAPTER 4: USER PROGRAMMING

4.0 PIN CODE EDIT

4.0.1 MASTER USER

4.0.2 USER

4.0.3 GUEST

4.0.4 DURESS

4.0.5 TIMER

4.0.5.1 IO ON

4.0.5.2 IO OFF

4.0.5.3 ARM

4.0.5.4 DISARM

4.0.6 CLOCK

4.0.7 INSTALLER ACCESS

4.0.8 FAST KEY ACCESS

4.0.9 PHONE LINE LOSS DETECTION

CHAPTER 5: KEYPAD SETTINGS

5.1 DOOR CHIME

5.2 KEYPAD SETTING VIEW

15

16

17

18

20

21

22

23

24

25

26

AX1 LED User Manual Rev 1.0

CHAPTER 6: WHEN THERE IS AN EMERGENCY

6.0 EMERGENCY ALARM

6.1 DURESS ALARM (CALLING FOR HELP)

6.2 TAMPER LOSS AND PHONE LINE LOSS ALARM

6.3 SYSTEM ALERT TO USER THROUGH TELEPHONE

6.3.1 WITH VOICE ACTIVE

6.3.2 WITH BEEPER

CHAPTER 7: SYSTEM CHECKING

7.0 TROUBLE VIEW

7.0.1 QUICK TROUBLE VIEW

7.1 TESTING SYSTEM

7.1.1 LOCAL SYSTEM TEST (WALK TEST)

7.1.2 BELL TEST

7.1.3 MANUAL TEST REPORTING FOR CMS

7.1.4 BATTERY TEST

GLOSSARY

LIMITATIONS

SYSTEM INFORMATION

QUICK REFERENCE

27

28

29

30

31

32

33

34

35

37

AX1 LED User Manual Rev 1.0

PREFACE

Thank you for selecting the new AX1 system. This manual will explain to you on how to operate your AX1 alarm and home automation system. This system is made up of a control panel, keypads, integrated switch module and telephone voice module. Specific areas of detections are called zones. Zones can be programmed to have different characteristics. Some zones may be 24-hour zones; they remain armed even when the alarm system is in disarm mode. (This setting is done during the installer programming as per user‟s request). In addition, some zones can be programmed by the users to allow zone bypassing. When you bypass a zone, the zone is temporarily removed from the alarm system. But always remember that bypassed zones are not protected.

How your AX1 alarm and home automation system works?

When a detection device is triggered, the zone indicator will light up. If the alarm system is armed, the control panel responds by reporting an alarm condition. The control of the system can be done either through keypad or telephone. If the alarm system is triggered, the signal can be transmitted to a central monitoring station (CMS). (Provided the AX1 system is connected to CMS)

For safety purposes, the operation of the AX1 system requires the users to enter the personal identification number (PIN). User is advised to disable the installer access whenever necessary. (i.e. after the commissioning and servicing of alarm system.)

1

AX1 LED User Manual Rev 1.0

FEATURES

AX1 LED

1. 8 fully programmable zones

2. Expandable up to 8 output controls (with feedback capability)

3. Supports up to 4 LED keypads

4. 1 Real time ARM/DISARM timer on Daily Basis only.

5. 4 Real time ON/OFF timer on daily basis

6. 7 user codes & 1 guest code

7. 3 Soft Zones (Emergency/Fire/Panic)

8. 2 Programming Mode- Installer Programming and User Programming

9. 5 User Arming type (Auto home arming/ Day arming/ Away arming/ Force arming/

Night arming)

10. Real time clock function

11. Programmable Entry/Exit Delay Time

12. 4 bell types (Steady/ Pulse/ Chirp/ Silent)

13. 3 zone types [End-of-line (EOL) / Normally Open (NO) / Normally Close (NC)]

14. Adjustable loop response sensitivity

15. Resetable auxiliary power supply upon Alarm Clearing

16. Key Switch function (Latch/ Momentary)

17. Dedicated Tamper zone

18. AC power supply monitoring

19. Low battery indication

20. Short circuit indication & protection

21. Bell Loss indication

22. Bell Test function

23. Telephone line loss detection

24. Programmable Event Reporting Code

25. Telephone Voice Module

26. RS485 ready (to support longer distance communication)

27. Report events to 4 phone numbers with 4 account numbers

28. Ademco® Contact ID CMS reporting format

29. Voice reporting format (direct to user) or tone reporting format

30. Interactive Voice menu or tone beepers during user call in

31. Support Remote programming via touch tone telephone

32. Programmable event trigger

2

AX1 LED User Manual Rev 1.0

33. Fast Key on Keypad for Easy menu access

34. Duress code

35. Walk test function

36. Double Call-in Feature for Fax Machine telephone line sharing

37. 16 Event Trigger Outputs with programmable countdown timer

3

LED KEYPAD OUTLOOK

Key Indication

Auto-Home Arming /

Testing

Day Arming / Keypad

Setting

Night Arming / View

Timer

Fire

Force Arming

Home Automation

Clear Alarm Memory

Emergency

Door Chime on/off

View Trouble

Zone Bypass Mode

Panic

Cancel Enter

Command

4

ZONE STATUS INDICATORS

SYSTEM STATUS INDICATORS

Power – Green Armed – Red Service – Yellow

KEYPAD ACCESS

AX1 LED User Manual Rev 1.0

ARMING MODE

Arming Type

Zone Status

Information

When To Use

Auto home

Arming

Normal Status

To arm the system with delay time in order for the user to exit the house

To arm the system in delay time with the interior zone bypassed provided that the user does not leave the premises

When user

leaves the house

and no one is at

home.

Day Arming

Normal Status

The perimeter zone is armed instantly while the user stays at home

The interior zones are automatically bypassed

When user is at

home.

Away Arming

Normal Status

To arm the system instantly through telephone when the user are away from the house.

The interior zones are not bypassed

When user are

outside.

Force Arming

Normal Status

or

Abnormal

Status

To force arm the system instantly regardless of the zone status.

The interior zones are not bypassed

When there are

zone still open &

user is at home.

Night Arming

Normal Status

The perimeter zone is armed instantly while user stays at home.

The interior zones are automatically bypassed. The delay zones become instant zones.

When everyone

come back to home & user

want to sleep.

NOTE: Zone refers to the designated areas that are protected by the AX1 system. Zone status refers to the

condition of the area. Normal status means door, window or detectors are in good/close condition. While abnormal status means the door/window may have been opened or the detector is not functioning.

SOUND INDICATION

Sound Indication

Description

Acceptance / Acknowledgement tone

2 fast beeps

Error tone

Continuous buzz for about 2 seconds

Entry delay

Continuous beeping, fast beep for the last 10 sec

Exit delay

Continuous slow beep, fast beep for the last 10 sec

Door chime

Continuous tone for about 2 seconds

Alarm

Chirp (1 second ON/ 4 seconds OFF) Pulse (2 seconds ON/ 2 seconds OFF) Continuous Tone Silent

5

AX1 LED User Manual Rev 1.0

LIGHT INDICATION

AX1 LED Keypad Display’s Reference Table

NOTE:

* : When AC power ON, LED is ON; When AC power failure, LED is OFF

** : When armed, LED = ON When Emergency/Fire/Panic, LED = Flash When disarmed, LED = OFF

*** : When trouble occurs, LED is ON; when no trouble occurs, LED is OFF

Flash : 0.5 second ON, 0.5 second OFF Fast flash : 0.1 second ON, 0.1 second OFF

KEYPAD NAVIGATION KEY FUNCTION

[COM] Key : Command [#] Key : Enter [*] Key : Cancel

No

Description

Power

Armed

Service

Zones

1

Normal Mode

*

OFF

***

Pending

2

Arming

*

ON

***

Pending

3

Home Automation Mode

Flash

OFF

Flash

Pending

4

User Programming Mode

Flash

Pending

5

AC power failure

OFF

**

ON

Pending

6

Trouble occurs

*

**

ON

Pending

7

View Trouble Mode

*

**

Flash

ON according to the type

of trouble

8

Zone Status (Triggered) (Bypassed) (Alarmed)

* * *

** ** **

*** *** ***

ON

Flash

Fast flash

9

Tamper zone triggered

*

Fast flash

***

All zone‟s LEDs

Fast flash

10

Telephone line loss alarm triggered

*

Fast flash

Pending

11

Walk test

*

Flash

Pending

6

AX1 LED User Manual Rev 1.0

[CHAPTER 1] ALARM SYSTEM CONTROL

1.0 USING LED KEYPAD

1.0.1 ARMING

1.0.1.1 QUICK ARMING

Command

Information

Press and hold the button [ ] for 2 seconds

Auto Home Arming

Press and hold the button [ ] for 2 seconds

Day Arming

Press and hold the button [ ] for 2 seconds

Night Arming

Press and hold the button [ ] for 2 seconds

Force Arming

7

Press [User PIN] and #

Exit delay starts to count down with sound.

Press [User

PIN] and hold [ ] for 2 sec.

Press [User PIN] and hold

[ ] for 2 sec.

Press [User PIN] and hold

[ ] for 2 sec.

System is now armed.

AX1 LED User Manual Rev 1.0

1.0.2 DISARMING

1.0.2.1 IN ARMED/ALARM MODE

Command

Information

 To disarm the system, press [User PIN] [#].

 The keypad will beep twice upon

confirmation. Otherwise, the error tone will sound if PIN numbers are entered wrongly.

 The ARMED light will go OFF once the

system is disarmed.

8

System is now disarmed

Press [User PIN] [#] to disarm

O.Y.L. Technology AX1 LED User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual