OYL MANUFACTURING AC040A, AC058AR, AC075B, AC100B, AC125B Installation Manual

...
INSTALLATION
MANUAL
INSTALLATION
MANUAL
AIR COOLED MINI CHILLER
CK20AN-Cover 20/07/2000, 14:491
INST ALLA TION MANUAL
This manual provides the procedures of installation to ensure a safe and good standard of operation for the air conditioner unit. Special adjustment may be necessary to suit local requirements.
Before using your air conditioner, please read this instruction manual carefully and keep it for future r eference.
AIR COOLED MINI CHILLER
MODEL
Reference Model
AC040A AC050A AC058A
AC040AR AC050AR AC058AR
AC075B AC100B AC125B
AC075BR AC100BR AC125BR
Models
AMAC040A / MAC040A AMAC050A / MAC050A AMAC058A / MAC058A
AMAC040AR / MAC040AR AMAC050AR / MAC050AR AMAC058AR / MAC058AR
AMAC075B / MAC075B AMAC100B / MAC100B AMAC125B / MAC125B
AMAC075BR / MAC075BR AMAC100BR / MAC100BR AMAC125BR / MAC125BR
Part No.:08019008612
1-1
IM-AC-1099L
CONTENTS
- Safety Precautions page 2
- Outline And Dimensions page 3
- Unit Installation page 4
- Refrigerant Circuit page 6
- W ater Filling page 6
- Electrical Wiring Connection page 6
- Chiller Control Operation Guide page 8
- Trouble Shooting page 9
SAFETY PRECAUTIONS
Before installing the air conditioner unit, please read the following safety precautions carefully.
! W arning
• Installation and maintenance should be performed by qualified persons who are familiar with local code and regulation, and experienced with this type of appliance.
• All field wiring must be installed in accordance with the national wiring regulation.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work according to the wiring diagram.
• The unit must be GROUNDED to prevent possible hazards due to insulation failure.
• All electrical wiring must not touch the refrigerant piping, compressor or any moving parts of the fan motors.
• Confirm that the unit has been switched OFF before installing or servicing the unit.
IMPORTANT
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
! Caution
Please take note of the following important points when installing.
• Do not install the unit where leakage of flammable gas may occur.
If gas leaks and accumulates around the unit, it may cause fire ignition.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the furniture.
• Do not overcharge the unit.
This unit is factory pre-charged. Overcharge will cause over-current or damage to the compressor.
• Ensure that the units panel is closed after service or installation.
Unsecured panels will cause unit to operate noisily.
1-2
AC075/100/125
OUTLINE AND DIMENSIONS
AC040/050/058
1-3
Loading...
+ 7 hidden pages