Oyen Digital U32-SSD-1000-SL, U32-HDD-1000-BK, U32-54-1000-SL User manual
U32 Shadow™ USB 3.0
User Manual
/8
Data transfer speeds depend on the host computer port.
U32 Shadow
(3) Connecting the Drive
Connecting the drive:
1) Connect the USB connector from the USB cable to a USB port on
your computer.
connecting both USB connectors to two USB ports on the host computer.)
2) Wait 5-20 seconds for the computer to recognize the drive.
3) The drive is now ready for use.
4) (MAC Users) As shipped, the drive provides read-only access for
Mac. All Mac users must reformat the drive using the instructions
in the “Formatting the Drive” section of this manual.
LED
Notes:
• Front USB ports of a desktop computer may not be able to
provide adequate power. We recommend connecting to rear ports.
• A USB port on a PCMCIA or ExpressCard may not be able to
provide adequate power.
• If connecting to a USB Hub, make sure it is a powered Hub (one
that uses an AC adapter).
(If your drive includes a USB y-cable, we recommend
(4) Formatting the Drive (5) Using the Drive (6) Disconnecting the Drive
(4) Formatting the Drive (5) Using the Drive (6) Disconnecting the Drive
The drive is pre-formatted as NTFS, the preferred le system for
Windows. For full functionality on Mac OS computers, you must
reformat the drive before use.
To format the drive for Mac OS X:
1. Connect the drive to your computer.
2. Open Disk Utility (Applications folder > Utilities > Disk Utility).
3. From the list on the left, click on the external drive with the
size in GB (not the indented item underneath).
4. Click the ‘Partition’ tab at the top of the application.
5. Select the drop down menu under ‘Volume Scheme’ and
choose 1 partition (or select 2 or higher for more partitions).
6. Click ‘Options’ and select ‘GUID Partition’ then click Ok.
7. Enter a name and select Mac OS Extended (Journaled) *.
8. Click ‘Apply’. Click ‘Partition’ to complete the process.
9. Upon completion, the drive will be available for use.
* If you will be using the drive with both Windows and Mac,
select MS-DOS from the drop down menu. This will create a
FAT-32 partition, which is compatible with both Mac and Win.
Note: The maximum size of a le on a FAT-32 partition is 4GB.
Using the drive with the included software
The drive includes software (via download) that allows you to
easily backup your important les. The software is not required in
order to use the drive. To install the software, simply follow the
steps on the included glossy card.
Using the drive without software
1) Look for the external drive in My Computer (Win) or Desktop (Mac).
2) Click and hold down the mouse button on the le/folder that you
want to copy to the drive.
3) Drag the mouse over the icon representing the external drive.
4) Let go of the mouse button and the le will copy to the drive.
5) The task is complete. This is known as a "drag-and-drop" action.
Using the drive with Time Machine (Mac Users Only)
1) Make sure the drive is formatted as Mac OS Extended (Journaled)
as described in the “Formatting the Drive” section.
2) Go to the Apple Menu > System Preferences and click on the
Time Machine icon. The Time Machine panel will then launch.
3) Click On to enable Time Machine.
4) Select the external drive and choose “Use for Backup.”
5) You can set additional options by clicking the Options button.
6) Time Machine is now backing up your Mac automatically to the
external drive.
Windows: Close all windows and applications that are accessing
the drive. Click the green “Eject Hardware” (Safely Remove
Hardware) icon in the system tray and highlight the external drive.
Wait for a few seconds until the system prompts “You may safely
remove this device.”
MAC: Close all windows and applications that are accessing the
drive. Drag the external drive to the Trash/Eject icon to dismount it.
After the disk icon has disappeared from the desktop, you may
safely disconnect the external drive.
(7) Warranty Information
This product includes a three (3) year repair/replacement
warranty provided by Oyen Digital. This warranty is nontransferable and is limited to the original purchaser. Warranty
service may be requested by completing the form at the
following link: www.oyendigital.com/rma-request-form.html
For our complete warranty policy, visit:
www.oyendigital.com/warranty.html
(8) Safety Information
The disk drive is a delicate electronic device and is susceptible
to damage due to excessive physical shock. Please handle the
unit with care.
(9) FAQs
(9) FAQs
Q: Can I use my drive with bus power only?
A: Yes, in the majority of cases bus power is adequate. However,
USB 2.0 ports may not have enough power for a higher-capacity
SSD version (480GB or more). When using a U32 Shadow SSD with a
USB 2.0 port, we recommend using a USB Y-Cable which can be found
at the following link:
http://oyendigital.com/hard-drives/store/USB-3-Y-CABLE.html
Q: Why does my computer show that the external drive
has less capacity than advertised?
A: In the drive industry the partitioned size will be less than the
printed capacity on the label. This is due to the fact that computers
calculate capacity based on a binary (base 2) method, where
1GB = 1024 MB. The drive industry calculates using a decimal
method, where 1GB = 1000 MB. This is why the two dierent industries
will report dierent capacities for the same drive.
For other questions please contact tech support or visit the FAQ
section of our Web site (www.oyendigital.com/support.html).
Technical Support: tech@oyendigital.com
Loading...