oxic XFO1013TS, XFO1013TM, XFO1013RS, XFO1013RM User Manual

TRANSMITER AND RECEIVER PAIR

SINGLE MODE
XFO1013TRS SERIES

TRANSMITER : XFO1013TS / XFO1013TM
RECEIVER: XFO1013RS / XFO1013RM

1-CHANNEL DIGITALLY ENCODED VIDEO /

1-CHANNEL BI-DIRECTIONAL DATA MULTIPLEXER

USER’S MANUAL

Table Of Contents

General Information……………………………………………. 2

Introduction…………………………………………………… 2
Technical Specifications………………………………….. 2

Installation Instructions

………………………………………... 4

Installation Procedure…………………………………….. 4
System Terminal Block Connections…………………. 5
Indicator LEDs

………………………………………………. 6

Troubleshooting…………………………………………………. 8
Limited Warranty

………………………………………………….9

１

GENERAL INFORMATION

Introduction:

The OXIC XFO-1013TRS Series video and data transmitter and receiver support
simultaneous transmission of one channels of 8-bit digitally encoded video and one
channel of bi-directional data over one multimode and single-mode optical fiber. The
modules are universally compatible with major camera systems and support RS-485
and RS-232 data protocol. Plug and Play design ensures the ease of installation and
electronic and optical adjustments are never required.

Model Number

Unit Type Model Number
One-channel Digitally Encoded Video/One-channel Data Transmitter XFO-1013TS
One-channel Digitally Encoded Video/One-channel Data Receiver XFO-1013RS

Technical Specifications:

VIDEO

Video Input： 1 volt pk-pk (75 ohms)
Input/Output Channels： 1
Bandwidth： 5 Hz - 8 MHz
Bit Resolution： 8-bit
Differential Gain： < 2%
Differential Phase： < 0.6°
Tilt： < 1%
S/N Ratio： 67dB (Weighed)

DATA

Data Interface： RS-485/RS-232
Data Channel： 2

Data Rate： 100Kbps
Bit Error Rate： 10-9

２