Oxford Garden Siena Side Table User Manual

877.866.3331 (fax) 502.719.8888
1729 Research Drive, Unit A Louisville, Kentucky 40 299
O X F O R D G A R D E N
Assembly Instructions page 1
Siena Side Table
I TE M - SS TA
S I E NA S I D E TA B L E
O X F O R D G A R D E N
About Shorea Wood
Shorea is a tropical hardwood that is comparable to teak. Because of its high oil content it is resistant to rotting, bug infestation, and the effects of wind, rain, sun, and snow. If left untreated shorea weathers naturally to a beautiful silver gray color. Some surface roughness may develop, especially at the end grain, but over a period of about one year, the natural weathering process will stabilize. Moderate checking in the grain is normal with exposure to the elements. Small surface cracks that may appear in no way affect the structural integrity of the furniture. As weather conditions and temperatures fluctuate these small cracks may expand and contract.
Tools (included)
7mm Wrench
: 1
QUANTITY
1 Table Top
QUANTITY: 1
2 Leg
QUANTITY: 4
Hardware
A
7mm Metal Washer
QUANTITY: 4
7mm Hexagon Nut
B
QUANTITY: 4
Finishing Items (included)
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to remove the sawdust that may cause some staining.
Wood Care Instruction
To prevent the staining of concrete or tile the furniture should be rinsed well after assembly to remove dust that might remain from the manufacturing process. Although shorea weathers well we recommend a routine application of teak oil or Cabot’s Australian Timber Oil in extremely dry climates. A routine oiling is also recommended for furniture to be used for dining purposes to discourage staining from food and drink spills.
For seasonal cleaning rinse the furniture well and then scrub (using a sponge or soft bristle brush) with a mild solution of water, laundry detergent and a little bleach. Rinse with fresh water.
To restore the original wood color, Oxford Garden suggests applying Cabot’s Australian Timber Oil or any high quality teak oil after cleaning. Test in an inconspicuous spot first, to approve the color. Application of oil is at the customer’s discretion and is not covered by the warranty. Paint or any products with polyurethane are not recommended, as application of these products will void the warranty as well.
For additional information regarding our warranty, please visit www.oxfordgarden.com
Assembly Instructions page 2 Siena Side Table
Step 1
On a clean flat surface, lay table top 1 upside down on its face.
Step 2
Place the bolt of one leg 2 through the holes in the corner brace of table top 1 . Slide one metal washer A onto the bolt. Screw one hexagon nut B onto the bolt and tighten with wrench (supplied). Repeat for other three legs.
2
A
B
1
Step 3
Turn table upright and enjoy.
Loading...