Oxford Garden Hampton Stool User Manual
877.866.3331 (fax) 502.719.8888
1729 Research Drive, Unit A Louisville, Kentucky 40 299
O X F O R D G A R D E N
ITE M - HAC ST
C O U N T E R S T O O L
H A M P T O N
Assembly Instructions
Components
1 Right Leg Assembly
QUANTITY: 1
page 1
Hampton Counter Stool
Hardware
10mm Dowel
A
QUANTITY: 14
Wood Screw
B
QUANTITY: 6
Finishing Items (included)
O X F O R D G A R D E N
About Shorea Wood
Shorea is a tropical hardwood that is comparable to teak. Because of its high oil content it
is resistant to rotting, bug infestation, and the effects of wind, rain, sun, and snow. If left
untreated shorea weathers naturally to a beautiful silver gray color. Some surface
roughness may develop, especially at the end grain, but over a period of about one year,
the natural weathering process will stabilize. Moderate checking in the grain is normal
with exposure to the elements. Small surface cracks that may appear in no way affect the
structural integrity of the furniture. As weather conditions and temperatures fluctuate
these small cracks may expand and contract.
Wood Care Instruction
To prevent the staining of concrete or tile the furniture should be rinsed well after
assembly to remove dust that might remain from the manufacturing process. Although
shorea weathers well we recommend a routine application of teak oil or Cabot’s
Australian Timber Oil in extremely dry climates. A routine oiling is also recommended for
furniture to be used for dining purposes to discourage staining from food and drink spills.
For seasonal cleaning rinse the furniture well and then scrub (using a sponge or soft
bristle brush) with a mild solution of water, laundry detergent and a little bleach. Rinse
with fresh water.
To restore the original wood color, Oxford Garden suggests applying Cabot’s Australian
Timber Oil or any high quality teak oil after cleaning. Test in an inconspicuous spot first, to
approve the color. Application of oil is at the customer’s discretion and is not covered by
the warranty. Paint or any products with polyurethane are not recommended, as
application of these products will void the warranty as well.
For additional information regarding our warranty, please visit www.oxfordgarden.com
2 Left Leg Assembly
QUANTITY: 1
3 Seat
QUANTITY: 1
4 Back Seat Rail
QUANTITY: 1
5 Front Seat Rail
QUANTITY: 1
6 Stretcher
QUANTITY: 2
Medium Grit Sandpaper
NOTE: A hammer and a phillips head screwdriver
(not provided) will be needed for the assembly
of this stool.
NOTE: If the furniture is going to be placed
on a concrete or tile patio, it should first
be rinsed well to remove the sawdust
that may cause some staining.
Assembly Instructions page 2 Hampton Counter Stool
Step 1
On a clean flat surface, lay right leg assembly on its
side mortise holes facing up. Line up and insert the front
seat rail into the right leg assembly.
NOTE: Do not hammer in any dowels until step 5.
5
5
1
1
Step 2
Insert the seat into position as shown in Detail 1.
Next repeat step 1 for the back seat rail .
4
3
4
3
Detail 1
Step 3 Step 5
Insert each stretcher as shown.
6
6
Step 4
Insert the left leg assembly .
2
2
With a hammer, drive 12 dowels into the predrilled holes as shown.
NOTE: Insert the tapered end of the dowels first. The dowels should
be easily driven in flush. If there is strong resistance, do not force the
dowel. Sand to smooth off areas around the dowel pins.
A
A
Step 6
Using a phillips head screwdriver, screw two wood screws into
the predrilled holes on each side of the seat assembly as shown.
Repeat on opposite side of the seat assembly using the remaining
2 wood screws.
A
A
A
A
B
B
B
Loading...