Oxford Garden Capri 34 User Manual
877.866.3331 (fax) 502.719.8888
1729 Research Drive, Unit A Louisville, Kentucky 40 299
O X F O R D G A R D E N
Assembly Instructions page 1 34” Capri Table
I TE M - C P 3 4 T A
3 4 ” C A P R I T A B L E
O X F O R D G A R D E N
About Acacia Wood
Acacia is a plantation grown hardwood, high in oil content. It is resistant to weather,
rotting, and bug infestation.
Tools (included)
Hex Head Wrench
QUANTITY: 1
Components
1 Table Top Assembly
QUANTITY: 1
2 Corner Posts
QUANTITY: 4
Hardware
Metal Washers
A
QUANTITY: 8
Hex Nuts
B
QUANTITY: 8
Wood Care Instruction
A seasonal cleaning may be desired. This can be done easily with a mild solution of water,
laundry detergent and a little bleach. Just rinse the furniture and using a sponge or soft
bristle brush scrub the furniture with the solution. Lastly, rinse the furniture with fresh
water. Although Acacia weathers well we recommend a routine application of Cabot’s
Australian Timber Oil in umber brown in extremely dry climates. A routine oiling is also
recommended for furniture to be used for dining purposes to discourage staining from
food and drink spills.
To restore the original wood color, Oxford Garden suggests applying Cabot’s Australian
Timber Oil in brown umber (available through Oxford Garden) after cleaning. Paint or any
products with polyurethane are not recommended, as application of these products will
void the warranty.
For additional information regarding our warranty, please visit www.oxfordgarden.com
3 Parasol Hole Cap
QUANTITY: 1
Assembly Instructions page 2 34” Capri Table
Step 1
On a clean flat surface, lay table top upside down.
1
1
Step 2
Insert the threaded rods on one corner post into
holes located on one corner of table top.
2
Step 3
Secure corner post to the table top using metal washer
and Hex Nut .
B
A
B
Step 3 (detail)
Step 4
A
Repeat steps 2 and 3 for the remaining 3 corner posts.
Step 5
Carefully turn the assembled table in an upright position.
2
A
B
A
B
Loading...