Owl Labs MTW100 Users manual

Safety & Troubleshooting:

Safety, compliance, troubleshooting and other important product information regarding your Meeting
Owl™ can be found online at www.owllabs.com/support.

Power Supply:

For power, use a UL Listed power supply marked "LPS" or "Class 2" with output rated 12VDC, 3A.

Model Number: MTW100
Operating Temperature: 0˚-30˚C Ambient

Trademark Notice:

© Owl Labs Inc. All rights reserved. Owl Labs Inc.,Owl Labs, Meeting Owl, Meeting Owl App, Owl Barn,
the Owl Labs logo and other Owl Labs Inc. marks are owned by Owl Labs Inc. and may be registered.
Apple and the Apple logo are trademarks of Apple Inc., registered in the US and other countries. App
Store is a service mark of Apple Inc. Google, Android, Google Play, and the Google Play logo are
trademarks of Google Inc. All other trademarks are the property of their respective owners.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications to the radio not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

IC Statement:

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.

-----------------------------------------------------------------

Bluetooth® guidelines (link):

The “®” symbol needs to appear in superscript with the figure mark and the combination mark at all times
and included with the word mark—Bluetooth®—on the first and most prominent use. See page 6 of the
Brand Guide for more details. Whenever the Bluetooth word mark, figure mark, and/or combination mark
are used, they must be attributed within a footnote that denotes their trademark status. The footnote for
using the trademark is as follows: “The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc., and any use of such marks by [licensee name] is under license. Other
trademarks and trade names are those of their respective owners.”