Page 1
®
PCI Express Card for 2.5” SATA Drives
®
PACKAGE CONTENTS
• OWC Mercury Accelsior® S PCIe card (drive not included)
• (4) Phillips screws
• Quick start guide
STEP 1:
Remove the OWC Mercury Accelsior S from the packaging
and set it down on a at surface with the SATA port facing up.
STEP 2:
Install the 2.5” SATA drive of your choice (see reverse page for
detailed instructions including pictures).
STEP 3:
Install the OWC Mercury Accelsior S in a compatible PCIe
slot and secure it to the computer chassis according to its
specications.
Your computer is a static-sensitive device. It is
susceptible to invisible damage if not protected
during installation.
We recommend proper grounding by using a
grounding strap. Make sure to work in a clean,
static-free area, and avoid wearing clothing that
retains static charges.
HARDWARE INSTALLATION
(see reverse page for pictures)
Before Installing the OWC Mercury Accelsior S PCIe Card...
• Make sure computer is turned o and unplugged from its power
source
• Take appropriate electrostatic discharge precautions:
SYSTEM REQUIREMENTS
MAC® REQUIREMENTS
OPERATING SYSTEM: OS X® v10.6 and later
HARDWARE: Intel-based Mac with an available PCIe slot capable
of supporting an x2 (2-lane) PCIe card. For optimal
performance, use a PCIe 2.0 slot running at x4 speeds or
greater.
PC REQUIREMENTS
OPERATING SYSTEM: Windows® Vista and later
HARDWARE: Any computer with an available PCIe 2.0 or
1.0 slot capable of supporting an x2 (2-lane) PCIe card.
For optimal performance, use a PCIe 2.0 slot running at x4
speeds or greater.
SUPPORTED DRIVES
Any 2.5” SATA hard drive (HDD) or solid state drive (SSD)
QUICK START GUIDE
TECHNICAL SUPPORT
HOURS OF OPERATION
8AM - 8PM (CT) Monday - Friday 9AM - 4PM (CT) Saturday
By Telephone - (800) 275-4576 (North America)
International customers please call +1 (815) 338-8685
Live Chat is available Mon-Fri 8AM-8PM | Sat 9AM-4PM
Visit: http://www.macsales.com/support for more information.
Or, you can email. Submit your email at
http://eshop.macsales.com/Service/Tech.cfm
For more information, please visit: http://www.macsales.com/static
Page 2
®
PCI Express Card for 2.5” SATA Drives
®
Set the OWC Mercury Accelsior S down
on a at surface. Make sure the black SATA
connector is facing up, as shown.
DRIVE INSTALLATION INSTRUCTIONS
Slide the SATA connector on the drive
into the SATA connector on the OWC
Mercury Accelsior S. Make sure the drive
is fully seated, as shown.
Holding the drive securely to the OWC
Mercury Accelsior S, turn over the OWC
Mercury Accelsior S, as shown.
Install the four Phillips screws into the
four screw holes to secure the drive to
the OWC Mercury Accelsior S, as shown.
1
2
4
3
R1 03/06/15 SL OWCMANACS
Copyrights and Trademarks:
© 2015 Other World Computing. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Other World Computing. Mercury Accelsior, Other World
Computing, and OWC are trademarks of New Concepts Development Corporation, registered in the U.S. Patent and Trademark Oce and in Canada. The OWC logo
and the Other World Computing logo are trademarks of New Concepts Development Corporation. Mac and OS X are trademarks of Apple Inc., registered in the U.S.
and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. Other marks may be the trademark or registered
trademark property of their owners.
Warranty Information:
The complete hardware warranty information for your OWC Mercury Accelsior S PCIe SSD can be found at: http://eshop.macsales.com/Service/warranty_info.cfm.
These warranties are expressly subject to the website Terms & Conditions (“Terms”) & Terms of Sale located at http://eshop.macsales.com/service/terms/sale, which are
hereby incorporated herein and made a part hereof by this reference. For OWC’s complete return policies, please visit http://eshop.macsales.com/service/returnpolicy.
Loading...