D. FOd - repeat all tracks in a folder
In FM receiving status, short press to execute a full search (it is recommended to
execute at least one full search before using radio function. All founded stations will be
saved). In LINE input status, short press it to toggle between mute and normal volume.
7. : In USB / SD card reading status, short press it to go to the previous track. In FM
receiving status, short press it to select the next channel after a full station search has
been executed.
8. Mode: short press it to toggle between USB / SD and FM receiving modes.
9. Environment Switching: In USB / SD reading status, short press it to select an
environment mode (from Square, Meeting, Home, Hall and Personal); long press it to
toggle between recording folder and MP3 folder.
10. Recording: Short press to enable recording (USB / SD storage device need be
connected first). Dur i n g r ec or ding, reverberati on s h oul d b e tuned to the minimum. Long
press it to delete a recording/MP3 file. Recording in LINE or FM mode is available.
11. DC 9V charging.
12. Power switch: “ ” - ON; “ ” - OFF.
13. Earphone port: 3,5mm jack.
14. Audio Input: External sound sourc e inp ut por t (pl ug -and-play).
15. Reverb: Microphone reverb effect regulating knob.
16. Guitar input: Electric guitar input port.
17. Microphone volume: Microphone volume regulating knob.
18. Microphone input: Microphone input 3,5mm jack.
19. Microphone input: Microphone input 5mm jack.
20. Track selection via numeric key, used in the same way with 0-9 numeric keys on the
remote control. Long Press “0” key to control the flash light switch.
21. Recharging/ microphone indicator light: When recharger is connected, the red light
turns on. When the device is fully recharged, the green light turns on.
22. When microphone or earphone is connected, the blue light turns on.
Operation Instructions on Remote Control
1. Power Button: Short press to enter standby mode,
short press again to resume. If no device is connected,
the system goes to "-HI-".
2. : Functions as “ ” on the master device.
3. : Functions as “ ” on the master device.
4. : Functions as “ ” on the master device.
5. Mode: Functions as “Mode" on the mas ter d evice.