Outline MOVIE H 102, MOVIE B 215 User Manual

USER MANUAL

MOVIE H 102

Cinema Horn

OUTLINE S.R.L.

Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy

Tel.: [phone]
Fax [phone]
[e-mail]

www.outline.it

2

SAFETY REGULATIONS

Please read this manual carefully and in its en­tirety. It contains important information regarding
safety issues, including guidelines for general safe
use of rigging systems as well as advisories on gov­ernment regulations and liability laws. The suspen­sion of large, heavy objects in public places is subject

to numerous laws and regulations at the national/
federal, state/provincial, and local levels. The user
must assume the responsibility for making sure that
the use of any rigging system and its components in
any particular circumstance or venue conform to all
applicable laws and regulations in force at the time.

GENERAL SAFETY RULES

• Carefully read this manual in all its parts

• Respect the working load limits and maxi-

mum congurations of the elements and of any

third-party component (such as suspension

points, motors, rigging accessories, etc...)

• Do not incorporate any accessory not provided

by Outline; all damaged or defective components

must be replaced only by equivalent parts ap-

proved by Outline

• Ensure personnel health and safety, ensure that

no one is standing below the system during the

installation, ensure that all personnel involved in

the installation are equipped with personal safety

devices

• Always double check that the elements are cor-

rectly connected before suspending the system.

The rigging elements are easy to use, however the
installation shall be carried out only by qualied per­sonnel that are familiar with the rigging techniques,
safety recommendations and with the instructions
described in this manual.
All mechanical components are subject to wear
and tear over prolonged use as well as corrosive
agents, impacts or inappropriate use. For this rea­sons users have the responsibility to adopt and ad­here to a schedule of inspections and maintenance.
Key components (screws, connecting pins, welded
points, rigging bars) must be inspected before every
use. Outline strongly recommends to carefully in­spect the system components at least once a year,
reporting in a written document the date, the name
of the inspector, the points checked and any anom­alies discovered.

DISPOSAL OF WASTE MATERIALS

Your product is designed and manufactured
with high quality material and components,

which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by the
European Directive 2002/96/EC and subsequent
amendments. This means that the product must
NOT be disposed with other waste. It is the user’s

responsibility to dispose of their electrical and
electronic equipment by handing it over to an ap­proved re-processor. For more information about
where you can send your equipment for recycling,
please contact your local distributor. The correct
disposal of your old product will help prevent po­tential negative consequences for the environment
and human health.

CONFORMITY AND WARRANTY

All the Outline electro-acoustic and elec­tronic devices are in accordance with ob­jects stated by CEE/EU directives.

The CE declaration of conformity and the warranty
are printed on a document that is shipped with the
product.