Outdoor Solutions CBC22043HB User Manual
Outdoor Round Charcoal Barbecue Grill
Model No. CBC22043HB
For Outdoor Use Only!
WARNING! BE CAREFUL OF SHARP EDGES DURING ASSEMBLY.
Made In China
Save these instructions for future reference. If you are assembling this unit for someone
else, give this manual to them to read and save for future use.
Contact 1-800-694-0013 for assistance. Do not return to place of purchase.
Parts & Hardware List
Part List
1. Lid Handle
2. Air Vent
3. Lid
4. Bottom Bowl
5. Warming Rack
6. Cooking Grid
7. Charcoal Grid
8. Left Top Hinge*
9. Right Top Hinge*
10. Left Bottom Hinge*
11. Right Bottom Hinge*
12. Lock
13. Ash Receiver Slide
14. Ash Receiver
15.Rear Leg (2)
Warranty
Part No.
B0108-C00
B0105-A00
22043-01B
22043-020
N2204-151
N2204-022
N2204-023
P2204-261
P2204-262
P2204-263
P2204-261
B0107-G00
B0304-E01
B0304-D00
C1744-010
Expanded View
16. Front Leg (2)
17. Foot (2)
18. Bottom Mesh
19. Wheel (2)
C1744-020
B0305-L00
C1744-030
B0302-E05
Hardware List (Included)
*Pre-assembled
2
Assembly Instructions
. To avoid losing any small components or hardware, assemble your product on a hard level surface
that does not have cracks oropenings.
. Clear an area large enough to layout all components and hardware.
. When applicable, tighten all hardware connections by hand first. Once the step is completed, go
back and fully tighten all hardware.
. Follow all steps in order to properly assemble your product.
. The estimated assembly time is: 30-35 minutes.
Step 1
Attach air vent to lid (A Screw 1Pc / D Wing nut 1Pc)
Attach lid handle to lid (E Wing Nut 2Pcs / F Washer 2Pcs / G Lock Washer 2Pcs)
Tools Required: Knife or scissors, Phillips head screwdriver and wrench
A
F
D
Step 2
Attach ash receiver slide to bottom bowl (B Screw 1Pc / E Wing nut 1Pc)
G
B
E
3
E
Loading...