Outdoor GreatRoom Company VNG-1224BRN Installation Instructions Manual

The Vintage Fire Pit Table

Installation Instructions for Vintage Fire Pit Table

VNG-1224BRN

2

3

Contents

Required Tools…………………………….…..2

Placing and assembling the Table.………3

Gas Connection………………………….…….4

Igniter Installation…………….……………...6

Locating Propane tank………………………7

Finishing Touches……………………………7

Required Tools

 Utility Knife

To cut and remove packaging

 2 Open Ended Wrenches
 Leather Gloves

To protect hands from rough edges
found on coffee table during
installation.

 One AAA battery (not Included)

Required for electric spark igniter

installation

 Two people are required for this

installatio

IMPORTANT

Please consult your Crystal Fire instruction manual for detailed
instructions and important information related to burner installation,
including safety information, proper tightening of connections with
two wrenches, and full burner setup and lighting instructions.

DO NOT ATTEMPT TO INSTALL CRYSTAL FIRE BURNER WITHOUT

FIRST CONSULTING THE CRYSTAL FIRE OWNER’S MANUAL.

Contents

Required Tools……………………………………………….3
Included with your Fire Pit…………………………..…4
Assembly Instructions…………………………………….5
Gas Connections………………………………….………...6

Igniter Installation………………………………………….8
Position Your Tank (If Applicable)……………………9
Glass Installation……………………………………..……..9

Operating Instructions…………………………………..10

Required Tools

 Two people are required for this installation

 2 Open Ended Wrenches

To secure gas connections

 Leather Gloves

To protect hands from rough edges found on fire pit during
installation

 One AAA Battery (not included)

Required for electric spark igniter installation

 Utility Knife

To cut and remove packaging

 Power Drill with phillips head bit

To secure tile top to base

42482 REV A 9.27.17

4

Included with your Fire Pit

CF-1224 Burner Kit

Tile Top attachment brackets (4)

Self-piercing sheet metal screws (8)

Door

Base

Top