Outdoor GreatRoom Company SAN JUAN Owner's Manual

SAN JUAN

FIREPLACE

OWNER’S MANUAL

INSTALLATION INSTRUCTIONS

Contents__________________________

Contents……………………………….…………2

Required Tools….……………………………….3

Unwrapping.……………………………………..4

Removal of Firebox & Top..……..…………..….5

Placing the Unit……………….....………………6

Planning the Gas Line...………………..………..7

Locating LPG Tank.……………....……………..8

Anchoring…………..…………………………...9

Firebox Assembly……………...………………10

Installing the Hearth Pad.………………………11

Final Instructions / Dimensions…..…………….12

2

REQUIRED TOOLS

⇒ Razor Knife

• To cut and remove packaging.

⇒ Hammer or Pry Bar

• To remove 1 x 2 and staples.

⇒ Power Drill or Phillips Screw Driver

• To remove Packaging screws

⇒ Leather Gloves

• To protect hands from rough and sharp

items found on the San Juan Fireplace.

⇒ It is recommended that a minimum

of two people assemble and install
the San Juan Fireplace.

3

UNWRAPPING PROCEDURE

WARNING

THE CAST TOP AND HEARTH PAD
OF THE SAN JUAN IS NOT AT­TACHED. DO NOT SLIDE OR MOVE
THE UNIT UNTIL THESE ITEMS
HAVE BEEN REMOVED.

1. Carefully dissect the outside wrapping to
expose the unit. Maintain control of the
blade the product behind can be damaged.

2. When removing the packaging make sure
the Hearth Pad in back does not fall.

3. Remove the burner assembly from the fire­box.

Remove

Hearth Pad

and set aside

4