Outdoor GreatRoom Company NAPA-VALLEY-1224-K, NV-1224-BRN-K, NV-1224-BLK, Napa Valley Installation Instructions Manual

1 | P a g e

Napa Valley Fire Pit Table

Installation Instructions

For Models:

NAPA-VALLEY-1224-K, NV-1224-BRN-K, NV-1224-BLK-K, NV-1224-GRY-K,

NV-1224-BLK-W-K

2 | P a g e

Contents

Contents……………………………………………………..2

Required Tools…………………………………………..3

Placing and Assembling the
Table…………………….………………………………………4

Gas Connection………………………….…………….5

Igniter Installation…………….………………………...6

90221:D 4.28.2014

3 | P a g e

Required Tools

 Utility Knife

To cut and remove packaging

 2 Open Ended Wrenches

To make gas connections

 Leather Gloves

To protect hands from rough edges found on the coffee
table.

 One (1) AAA Battery (not included)

Required for piezoelectric igniter installation.

 Electric screw gun with Phillips tip

Included:

Tabletop frame Base Tiles (x10)

Bracket (x4)

Screw (x16)

4 | P a g e

Placing and Assembling the Fire Pit table

1. Remove all components from packaging and
inspect for damage or missing parts.

2. Move the base to desired location and set into
place.

 When locating your coffee table, refer to the

Crystal Fire manual and maintain clearance to
combustibles.

4. Line top up with base as shown.
Place brackets in locations shown (red
arrows below) and insert 4 screws
into each bracket.

3. Place top on base
as shown, making
sure it is centered in
both directions.

5. With top securely fastened to
base, set tiles into place.