Outdoor GreatRoom Company BC-20-AB, BC-20-BG, BC-20-MNB, BC-20-WO, BD-20-BG Installation Instructions Manual

Beacon Fire Table

Installation Instructions for Beacon Fire Table

BC-20-AB, BC-20-BG, BC-20-MNB, BC-20-WO

BD-20-BG, BD-20-MNB, BD-20-WO

1

Contents

Contents

Required Tools………………………………….........2

Included with your Fire Pit (Supercast)……..3

Included with your Fire Pit (Granite)………...4

Assembly Instructions……………………………….5

CF-SPARKER Installation…………………..……….5

Supercast Top Placement……………………….…6

Granite Top Installation…………………………….7

Gas Connections……………………………………….8

Burner Installation……………….……….………….9

Electrode Installation…………….…………….…..9

Drawer Operation and

Propane Tank Installation……………………….10

Fire Media Installation……………………….…...11

Burner Cover Installation………………..……....11

Operating Instructions..…………………………...12

Required Tools

 Utility Knife

To cut and remove packaging

 2 Open Ended Wrenches

To secure gas connections

 Leather Gloves

To protect hands from glass and sharp edges during install

 One AAA Battery (not included)

Required for electric spark igniter installation

 Two people are recommended for

this installation

IMPORTANT

Please consult your Crystal Fire instruction manual for detailed
instructions and important information related to the burner
installation including: lighting and operating instructions, safety
information, and proper tightening of connections with two wrenches.

DO NOT ATTEMPT TO INSTALL CRYSTAL FIRE BURNER WITHOUT

FIRST CONSULTING THE CRYSTAL FIRE OWNER’S MANUAL.

42494 REV B 09-17-18

Required Tools…………………………….…..2

Included with your Fire Pit……………….3

Assembly Instructions………………….………4

Gas Connections………………………….…….6

Igniter Installation…………….……………...8

Position Your Tank………………………7

Finishing Touches……………………………7

Required Tools

 Utility Knife

To cut and remove packaging

 2 Open Ended Wrenches

2

Beacon Metal Base

(Control Valve Installed)

Marbleized Noche Supercast

Top

White Onyx Supercast Top

Adhesive Foam Pads

(X4)

Ø20” Crystal Fire Burner

CF-20

Refer to Crystal Fire Manual for items included with crystal fire burners.

Included with Your Fire Table

(Supercast Top: BC-20-MNB, BD-20-MNB, BC-20-WO, BD-20-WO)

3

Beacon Metal Base

(Control Valve Installed)

Aluminum Frame and

Granite (4 pcs.)

Attachment bracket for

aluminum frame (X4) (for

granite top installations

only)

+

Self-Drilling Screws (X12)

Ø20” Crystal Fire Burner

CF-20

Included with Your Fire Table

(Granite Top: BC-20-AB, BC-20-BG, BD-20-BG)

Refer to Crystal Fire Manual for items included with crystal fire burners.

4

CF-SPARKER

 Do not discard any packaging until assembly is complete and unit is

tested. Keep all included manuals in a safe place for future reference.

 Warning: Exposed edges may be sharp, use leather gloves when

removing packaging and handling the base. Do not remove protective
cardboard packaging until you have placed the fire pit in its desired
final location.

Assembly Instructions

 Locate CF-SPARKER inside of crystal fire burner box.
 Remove CF-SPARKER cap and hex nut. Insert AAA battery

(not included) with + end out.

 Install CF-SPARKER into control panel as shown below.
 Depress CF-SPARKER button to test your sparker.

Un-packaging

1.

Base Placement

2.

CF-SPARKER Installation

3.

 Place base in desired final location.
 Place on a hard, flat surface. Avoid soft surfaces and

areas that collect water.

 Refer to Crystal Fire Manual included with your

Crystal Fire Burner for safety information regarding
the placement of your fire pit.

5