Outback THG2302P-3, THG3302P-3, TRG2301P-3, TRG3301P-3 Operating Instructions Manual
Photographs are not t o sc al e.
Specifications subject to change
without prior notice.
Assembly and Operating In st ructions for Outback®
Spectrum Select Hooded 2 Burn er and Spectrum Select Hooded 3 Burner Gas BBQ
WARNING
• For outdoor use only. Not f or commercial use.
• Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
• Warning: accessible parts may be very hot. Keep young children and pets away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any mod ification o f the appl i ance, mi sus e, or fai lure to f oll o w the instr u ct ions may b e
dangerous and will invalidate your warranty. This does not affect your statutory rights.
• Retain these instructions for future reference.
• Leak test annually, and whenever the gas bottle is removed or replaced. Check that
the hose connections are tight and leak test each time you reconnect the gas bottle.
• For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local de al er.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammabl e
vapours or liquids in th e vicinity of t his or any
other appliance.
2. A gas bottl e not co nnect ed for u se sh all not b e
stored in the vicinity of this or any other
appliance.
0359
THG2302P-3 THG3302P-3
2
Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram’.
CODE PART QTY
Outback® Spectrum
Select Hooded 2 Burner
Gas BBQ
Outback® Spectrum
Select Hooded 3 Burner
Gas BBQ
HOOD
A1
Hood (Pre-Assembled to Body)
1
A2 Hood Handle 1
A3 Heat Indicator 1
A4 Warming Rack 1
BODY
B1 Cooking Grill 1
B2 Cooking Griddle 1
B3 Lava Rock 1
B4 Lava Rock Basket 1
B5 Barbecue Body 1
B6 Knob
2 3
B7 Control Panel 1
B8 Burner
2 3
B9 Drip Tray 1
B10 Drip Tray Left Bracket 1
B11 Drip Tray Right Bracket 1
B12 Drip Pan 1
B13 Hose and Regulator Assembly 1
C1 Left Side Shelf 1
C2 Right Side Shelf 1
C3 Left Front Leg 1
C4 Left Rear Leg 1
C5 Right Front Leg 1
C6 Right Rear Leg 1
C7 Screen 1
C8 Front Fixing Support 1
C9 Trolley Base 1
C10 Rear Fixi ng Su pp ort 1
C11 Leg Endcap 6
C12 Axle 1
C13 Wheel 2
C14 Hubcap 2
HARDWARE
D1 M5x1 5 B ol t 4
D2 Washer 4
D3 M5 Nut 4
D4 M6x145 Bolt 8
D5 Spacer 8
D6 M6x2 2 Step Bolt 8
D7 M6x2 5 B ol t 8
D8 1/4-20UNCx12 Bolt 2
D9 Axle Washer 2
D10 Locknut 2
TROLLEY
Pre-Assembled Component
Quantit y varies accor di n g to m o d el purc hased
Appearance, si z e, an d c ons tr uc t ion may diff er according to m od el purc h ased
3
Parts Diagrams
Quantities vary according to model purchased. Specifications s ubject to change without prior notice. Fo r
more details on hardware, please see hardware pack page.
B1
A4
B13
C1
C3 C6
C7
C12
C13 C14
C11
A2
C4 C5
B2
A3
B10
B6
B7
B3
B9
B11
B12
A1
C9
C10
B4
C2
B8
D9
D10
B5
C8
4
Hardware Reference Diagram
Specifications subject to change without prior notice.
D1,D2,D3
D7
D4,D5
D6
D8
5
2
Assembly
IMPORTANT!
• TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
• Remove any internal components or packaging from the barbecue body.
• W hilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
• Please read the Important Information section carefully before assembly and use of your
barbecue.
1
Attach the Front Fixing Support (C8) and Rear Fixing Support (C10) onto the Trolley Base (C9) by
aligning corresponding holes and fixing with the 1/4-20UNCx12 Bolts (D8). Then attach the Leg s
(C3, C4, C5, C6) to the trolley base assembly using the M6x25 Bolts (D7). Ensure that the legs
with the Velcro attached to them are at the front of the barbecue, facing inwards.
Unscrew the Locknuts (D10) from both ends of the Axle (C12) and remove the Axle Washers
(D9). Slide the axle through the corresponding holes in the left legs. Place axle washers on each
end of the axle. Slide the Wheels (C13) over each end of the axle. Secure t he wheels into place
with the locknuts. Place the wheel Hubcaps (C14) onto the outsides of the wheels.
D10
C13
C12
C14
C3
D9
(Photo depicts trolley
from the reverse side)
C4
C5
C6
C8
C9
C10 D8
C3
6
4
3
Install a M6x22 Step Bolts (D6) on each leg, and then attach the Left Side Shelf (C1) and
Right Side Shelf (C2) onto left and right legs using the M6x22 step bolts. Hook the side
shelves onto the upper step bolts.
C1
C2
B1 B2
Remove all cast iron cooking components, lava rock, drip tray, and any internal packaging
from the barbecue body.
B3
B4
Loading...