Outback Excel 100T, Excel 300T, Excel 200T Assembly Manual
Excel 100T
Assembly and Operating Instructions for
Excel 100T, Excel 200T, and Excel 300T Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
WARNING
!" For outdoor use only. Not for commercial use.
!" Read instructions before using the appliance. Failure to follow instructions
could result in death, serious bodily injury, and/or property loss.
!" Warning: accessible parts may be very hot. Keep young children away.
!" Do not move the appliance during use.
!" Turn off the gas supply at the gas bottle after use.
!" Any modification of the appliance, misuse, or failure to follow the
instructions may be dangerous and will invalidate your warranty. This does
not affect your statutory rights.
!" Retain these instructions for future reference.
!" Leak test your barbecue annually. Check the hose connections are tight and
leak test them each time you reconnect the gas bottle.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other
flammable vapours or liquids in the vicinity
of this or any other appliance.
2. A gas bottle not connected for use shall not
be stored in the vicinity of this or any other
appliance.
0359
Excel 200T
Excel 300T
A. Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see the corresponding Hardware Reference Diagram for your barbecue model.
HOOD
BODY
TROLLEY
HARDWARE
CODEPART QTY
Hood (Pre-Assembled to Body)
A1
A2 Hood Handle 1
A3 Warming Rack 1
B1 Barbecue Body 1
B2 Burner 1
B3 Control Panel 1
B4 Knob 2
B5 Hose (if supplied)
B6 Lava Rock in Basket 1
B7 Cooking Grill 1
B8 Ignition Button 1
B9 Control Panel Heat Shield 1
B10 Main Electrode 1
B11 Hinge Bracket 2
B12 Body Heat Shield 1
B13 Body Support 2
B14 Grease Cup Holder 1
B15 Grease Cup 1
C1 Trolley Handle 1
C2 Side Shelf (with bracket)
C3 Side Shelf (without bracket)
C4 Side Shelf Bracket A
C5 Side Shelf Bracket B
C6 Side Burner Knob 1
C7 Side Burner Grid 1
C8 Side Burner Shelf 1
C9 Side Burner 1
C10 Side Burner Electrode 1
C11 Side Burner Valve / Hose Assembly 1
C12 Left Front Leg 1
C13 Left Rear Leg 1
C14 Right Front Leg 1
C15 Right Rear Leg 1
C16 Hose Tidy 1
C17 Gas Bottle Holder 1
C18 Leg End Loop 1
C19 Wheel Spacer 2
C20 Wheel 2
C21 Axle 1
C22 Bottom Shelf 1
C23 Gas Bottle Strap 1
D1 M6x15 Bolt
D2 M5x10 Bolt 4
D3 M4x10 Bolt 1
D4 ST4.0x10 Screw 3
D5 ST4.0x15 Screw 4
D6 ST4.8x15 Screw 2
D7 M8 Locknut 2
D8 M5 Nut 2
D9 Shelf Spacer
! Pre-Assembled Component
" Quantity varies according to model purchased
#$$Appearance, size, and construction may differ according to model
1
"
"
"
"
"
"
"
OUTBACK®
EXCEL 100T
!! !! !!
! ! !
! ! !
!! !! !!
! ! !
! ! !
!! !! !!
!! !! !!
! ! !
!! !! !!
!! !! !!
! ! !
!! !! !!
! ! !
! ! !
! ! !
! ! !
!
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
! ! !
!! !! !!
24 28 28
! ! !
! ! !
! !
! ! !
! ! !
! ! !
OUTBACK®
EXCEL 200T
1
1 1
1 1
1 1
8 4
OUTBACK®
EXCEL 300T
!
!
!
!
!
!
!
2
B1. Parts Diagram: Excel 100T
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 100.’
B15
B14
A2
A3
B3
B4
B5
C1
B8
C13
C23
A1 B1
B11
Pre-assembled body unit
includes the following
individual parts:
B2
B12
B13
C16
C19
B9
C17
C20
C21
C18
C14
C15
C22
B7
B6
B10
C12
3
B2. Hardware Reference Diagram: Excel 100T
D1
D1
D4
D2
D6
D7 D8
Specifications subject to change without prior notice.
4
C1. Parts Diagram: Excel 200T
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 200.’
B15
B14
C3
A2
A3
A1 B1
B11
Pre-assembled body unit
includes the following
individual parts:
B2
B12
B13
B3
B4
B5
B8
B9
B7
B6
B10
C2
C4
C5
C13
C23
C16
C19
C17
C20
C21
C18
C14
C15
C22
C12
5
C2. Hardware Reference Diagram: Excel 200T
D1
D2
D4
D8
D9
D7
D1
D5
D6
Specifications subject to change without prior notice.
6
D1. Parts Diagram: Excel 300T
A2
A3
B3
B4
B5
B8
C7
C10
C9
C8
C6
A1 B1
B11
Pre-assembled body unit
includes the following
individual parts:
B2
B12
B13
B9
C11
B14
B15
B10
B7
B6
C3
C4
C5
C13
C23
C16
C19
C17
C20
C21
C18
C14
C15
C22
C12
Quantities vary according to model purchased. Specifications subject to change without prior notice. For more
details on hardware, please see ‘Hardware Reference Diagram: Excel 300.’
7
D2. Hardware Reference Diagram: Excel 300T
D1
D1
D2
D4
D8
D3
D9
D5
D6
D7
Specifications subject to change without prior notice.
8
E. Assembly
C14
Attach the Left Front Leg
(C12) and Left Rear Leg
(C13) to the Gas Bottle
Holder (C17). The legs
are a push fit onto the gas
bottle holder. In case of
difficulty, they may need
tapping with a soft faced
mallet. Take care not to
damage the parts.
C18
Attach the Right Front Leg
(C14) and Right Rear Leg
(C15) to the Leg End Loop
(C18). The legs are a push
fit onto the leg end loop. In
case of difficulty, they may
need tapping with a soft
faced mallet. Take care not
to damage the parts.
C12
C13
C17
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/cross-point screwdriver, adjustable spanner or metric spanner set.
This barbecue requires two people for assembly. Please remove all packaging materials from all individual
parts before assembling. Please lay out all nuts and bolts and check lengths before assembling. Whilst
every care is taken during the manufacture of this product, care must be taken during the assembly in case
sharp edges are present.
% Excel 100T %$Excel 200T %$Excel 300T$
1
% Excel 100T %$Excel 200T %$Excel 300T$
2
9
Loading...