Ouellet RC840 User Manual

RC840T - Installation Instructions

On/Off Switching Electric Heating Relay with Built-in 24 V Transformer

RC840T

Application

The RC840T Electric Heating Relay is designed to control a line
voltage resistive load from a low voltage thermostat. The RC840T
relay has a built-in 24 V transformer and is compatible with 3-wire
(R,C,W) thermostats as well as 2-wire mechanical and battery­operated thermostats.

The RC840T operates silently and can be installed in bedrooms,
living rooms, or any other occupied area without disturbing
occupants. On a call for heat, the relay is immediately activated;
there is no delay. This increases temperature control and comfort.

NOTE: Not recommended for fast-cycling modulated regulation. For

fast-cycling heating equipment, we recommend the RT850 or
RT850T (integrated 24 V transformer) Solid State Relay.

Installation

The RC840T must be installed in an area where the temperature is
between -4°F and 140°F (-20°C and 60°C).

The RC840T can be installed on the side of an electrical box (1) or a
distribution panel or inside the wiring compartment of an electric
baseboard (2).

q Increase the thermostat temperature to activate the relay. Allow

system operation long enough to proof installation. Once
installation has been proofed, set temperature to normal
setpoint.

Typical Wiring Diagrams

You must provide an overload protection and
disconnect as required.

Figure 1: Connection to a 2-wire low voltage thermostat

For proper installation, use
a screw and a washer.

Figure 1: Installation on

the side of an electrical
box

 All wiring must comply with national and local electrical

code regulations.

 Installation should be carried out by an electrician.
 Disconnect power supply before installing the relay to pre-

vent electrical shock.

Figure 2: Installation inside

the wiring compartment of a
baseboard

You must provide an overload protection and
disconnect as required.

Figure 2: Connection to a 3-wire low voltage thermostat

n Secure relay to the mounting surface using the two mounting

brackets. Use the supplied lock nut to secure the relay to the
junction box.

o Wire the relay and connect according to typical wiring diagrams

(refer to figures 1 & 2).

p Once mounting and wiring have been completed, return power

to the heating system and test the installation.

1/2 400-276-002-B

Electrical Specifications

Warranty

Ensure ratings are suitable for your application.

Voltage (VAC) 208 240 277 347

Resistive load (A) 22 22 19 18

Inductive load (HP) 1.0 1.5

FLA 12

LRA 50

Control signal 24 VAC / 40 mA / 1.2 VA

Transformer ratings: 24 VAC / 1.2 VA / Class 2
Ambient operating temperature: -4°F to 140°F (-20°C to 60°C)
Ambient storage: -40°F to 175°F (-40°C to 80°C)
Humidity limits: 0 to 95% non-condensing
Net weight: 11.5 oz. (326 g)
Terminal wire size: 12 AWG
Certification:

AUBE TECHNOLOGIES INC. ONE (1) YEAR LIMITED WARRANTY

This product is guaranteed against workmanship defects for a one year
period following the initial date of purchase. During this period, AUBE
Technologies Inc. will repair or replace, at our option and without charge,
any defective product which has been used under normal conditions.

The warranty does not cover delivery costs and does not apply to products
poorly installed or randomly damaged following installation. This warranty
cancels and replaces any other manufacturer's express or implied warranty
as well as any other company commitment.

AUBE Technologies Inc. cannot be held liable for related or random
damages following the installation of this product. The defective product as
well as the purchase invoice must be returned to the place of purchase or
mailed, prepaid and insured, to the following address:

Aube Technologies Inc.
705 Montrichard
Saint-Jean-sur-Richelieu, Quebec, Canada J2X 5K8

Technical Support

If you have any questions concerning the installation of the
RC840T relay, call our technical support team at:

Phone: Montreal area: [phone]

Canada / U.S.: 1-800-831-AUBE

Fax: [phone]
Email: [e-mail]

Monday to Friday from 8:30 AM to 5:00 PM EST.

(2823)

RC840T Dimensions

For more information on our products, visit us at:

www.aubetech.com

Dimensions are expressed in INCHES [MM]

2/2 10/07/03 400-276-002-B