Otter Outdoors Cushion Bracket Seat User Manual

Parts Identification:

Sled

1

(Sold Separately)

Otter II Fish House Seat
Installation and Set-Up Instructions

Economy

3

Seat

Pin

(Qty 2)

Seat

Backrest

5

6

4

Seat Brace (Qty 1)

8

1/4 x 1 Hex Bolt

7

(Qty 4)

Tools Required:

7/16 Box End Wrench
7/16 Socket and Rachet
Hammer

Installation:

1. Layout all parts.

2. Slide the two pieces of the seat brace (Item

2) together. Hold pin in and slide to desired
position. See Diagram 1.

5/16 Washer
(Qty 8)

2

1/4 Nylon

9

Hex Lock Nut
(Qty 4)

Deluxe

Diagram 1

2

3. Attach seat brace (Item 2) under the front
edge of the sled (Item 1) as shown in
Diagram 2. Than lower the seat brace and
let it rest on the opposite sled edge.

Diagram 2

2

1

If you have the deluxe seat, place the backrest (Item 1) on the seat (Item 2) and line up the holes on
the bottom of the backrest and the back of the seat. Insert the pins (Item 3) through the holes. Use a
hammer to drive them all the way in.

1

3

2

Otter Outdoors Inc.

411 W Congress St. • Maple Lake, MN 55358

Phone [phone] • www.otteroutdoors.com

Deluxe Seat

September, 2005