Otter OBFTC 0010 A User Manual

Otter Products, LLC.

answer the call

pairing

record with the phone

FCC ID: 2AEEVOBFTC-0010-A

IC: 20048-OBFTC0010A

OBFTC-0010-A

Function of the headset operation

Before operating each function of the headset, please read the following introduction:

function

Power on

Pairing

Power off

Last Number
Redialing

BS156RL

button and time
(seconds)

In off mode ,pull apart
the headset, it will power
on .

1.Pull apart the
headset ,it will enter into
pairing mode
automatically （ never
connected / paired with
any devices ）；

2. In pairing
mode,headset
disconnect with phone
and other devices,it will
pair automatically

In On mode,touch the
magnet together,it will
power off

Pree MFB for twice;If
in 2 link status,then press

and hold “+”volume key

for 2 seconds

1.听 In On mode,shortly
press MFB ； When in
On mode ,could not use
the magnetic function to

status sketch remarks

Red and blue
indicator light will
flash ,it will last for 1
second

Blue and red light is
rapid flashing
alternately

Red and blue
indicator light will
flash ,it will last for 1
second

Aim at redialing
the last phone number
that you called

Could hear “Power on”/YEJ

After enter into the pairing mode,
blue and red light alternately
flashing,it will last for 2 minutes.Enter
into pairing/YEJ warning voice

YEJ warning voice

(your phone must be supported

with Bluetooth redialing mode

2. In off mode ：

Answering
the call

(End the
call)

Page 1 of 2

Requirement:headset
must be have

When a call coming,pull
apart the magnet,it will
pair with the phone
again ,if successful,could
answer the call
automatically

1.Shortly press MFB

2.Touch the magnet
together ,at the same

Can answer the call

through the headset

When you want to

cut off the call

In music state ,press MFB to
answer the call. If use the magnetic
function to end the call ,music will
transfer to your phone. (Recommend
not use the magnetic function to end
the call under such condition)

Beep once

Otter Products, LLC.

shortly press MFB

off

OBFTC-0010-A

Rejecting call

Mute

Two link
function

Music play
/stop

forward

BS156RL

time, headset will power
off.

Press and hold MFB for
2 seconds(In pairing
mode)

Press and hold “V+”

button for 3 seconds

Separated twice to
Connected with 2 phone

1.In standby mode,

2. touch the magnetic to
pause music and power

3. pull apart magnetic for
playing music

Long press V- for 2
second

Directly rejecting the

incoming call

The caller won’t hear

the sound from headset
Connected with two
phone at the same
time, enter into standby
mode

On music state Led shining once on every 10 second

on music state With voice guidance of “dou”

Could hear beep twice ,and
headset will enter into standby
mode(you phone need to support it)

Could here Beep twice

your phone need to support

backward

Ring for
coming call

sirr

Clear pairing
list

1.Some function will differ due to phone’s brand

2.For the Aptx function, it should be supported by phone with aptx

Long press V+ for 2
second

No need any operation It should support by phone

On music state, shortly
press V+ AND v- at the
same time
Without connection
state. Long press V+ and
V- until the red and blue
light flashed twice at the
same time, then power
off for clearing pairing list

on music state With voice guidance of “dou”

automaticed by

cellphone(voice dial)

red and blue light
flashed twice at the
same time

it should support by phone

Voice guidance with “dou do”

Page 2 of 2