DRITE Radio Model (seen from the top side)
DRITE Radio Model (seen from the bottom)
RF Engine
Block
Antenna
Motherboard
Battery -
Battery +
Program flex I/O
Speaker unit connectors
Mic flex
PEOPLE FIRST
Oticon Radio Model - Quick Installation Guide
Radio Model Name: DRITE
The DRITE 4 radio model is a low power, inductive radio transceiver working at 3.84 MHz consisting of an RF Engine Block (incl. DSP, radio & memory),
antenna coil, motherboard (incl. small passive components) and intended to be installed as a module into Oticon wireless hearing aid devices only. The module also
has all voltage regulators included inside the engine block. The module requires a battery, one or two microphones on a flex PCB and a speaker to be attached and
must be mounted in an external plastic shell. I t is possible for authorized personnel only to program the module through a flex I/O. The m odule is depicted below:
Oticon A/S Kongebakken 9 DK-2765 Smørum www.oticon.com
Main +45 39 17 71 00 Fax +45 39 27 79 00 Denmark CVR-no. 42334219
1
DRITE Radio Model ( se en from the side)
PEOPLE FIRST
Oticon Radio Model - Quick Installation Guide
Radio Model Name: DRITE
FCC ID: U28FU2DRIT IC: 1350B-FU2DRIT
Oticon A/S Kongebakken 9 DK-2765 Smørum www.oticon.com
Main +45 39 17 71 00 Fax +45 39 27 79 00 Denmark CVR-no. 42334219
2
Loading...