CIC, MIC, ITC, HS/LP
INSTRUCTIONS FOR USE
HIT PRO/HIT
Thank you
Thank you for choosing our product as your means to better hearing.
To support your efforts, we have put great care and attention into making sure that your
new hearing instruments are of the highest quality and that they are easy to use and
maintain.
We recommend that you read this manual carefully to achieve the maximum benefit from
your new hearing instruments.
Congratulations on your decision to actively improve your hearing with today’s most
advanced hearing technology in the market.
Contents
Instrument View CIC/MIC 5a
Instrument View ITC 5b
Instrument View HS/LP 5c
Changing batteries 7
Turning your instruments ON and OFF 9
Inserting your hearing instruments 10
Programs (Optional) 11
Stand-by – (only for instruments with push-button) 13
Volume Control (Optional for ITE only) 14
Telecoil (Optional) 15
AutoPhone (Optional) 16
Caring for your hearing instruments 18
Seven easy steps to better hearing 23
Common problems and their solutions 28
Warnings Yellow Pages
IMPORTANT NOTICE
Please familiarize yourself with the entire contents of this booklet before using your
hearing instru ments. It contains instructions and important informa tion about the use
and handling of your hearing instru ments and batteries.
5a
Instrument View CIC/MIC
Microphone opening Battery door
Ventilation opening
Sound outlet + wax
protection system
Ventilation opening
Removal string
Battery size: 10
5b
Instrument View ITC
Microphone openings
Battery door Ventilation opening
Ventilation opening
Sound outlet + wax
protection system
Push-button (Optional)
Battery size: 312
5c
Instrument View HS/LP
Battery size: 312
Microphone openings
Push-button (Optional) Sound outlet +
wax protection system
Ventilation openingVolume Control Wheel
(Optional)
Battery door
7
Changing batteries
The correct battery size appears in the instrument overview in the first section of this
document.
A worn out battery should be removed immediately and disposed of according to local
regulations.
When the battery power is low, you will hear 2 beeps. This pre-warning starts when
the battery has only a few hours of operation left. The pre-warning will be repeated
in moderate intervals to indicate it is time to change the battery.
To replace the battery, follow these instructions:
Open the battery door with your fingernail and remove •
the old battery. The old battery may be removed by
using the magnetic end of your MultiTool.
Use the magnet at the end of the tool to assist in handling the battery.
MultiTool
8 9
Remove the sticky label from the + side of the new battery.•
Insert the new battery so that its + marking faces the + sign •
printed on the battery door.
Close the battery door. If you feel any resistance, you may •
have inserted the battery incorrectly. Reinsert the battery
and try again.
It will take a few seconds before the battery works to full capacity.
Turning your instruments ON and OFF
Turn ON your hearing instrument by closing the battery door
completely with the battery in place.
When the battery door is closed the instrument will start up
by playing a jingle. This indicates that the battery is working
and the instrument is operating.
Turn OFF your hearing instrument by opening the battery
door with your finger nail.
To preserve the battery, make sure your hearing instrument
is switched off when you are not wearing it.
ON
OFF
IMPORTANT NOTICE
Open the battery compartment fully to allow air to circulate whenever you are not using
your hearing instrument, especially at night!
10 11
Inserting your hearing instruments
Place the tip of the hearing instrument in your ear canal.
Gently pull your earlobe and push the hearing instrument
into the ear canal, twisting slightly if necessary, following
the natural contour of the ear canal.
DO NOT use the battery door as a handle to insert or remove
your instruments. It is not designed for this purpose.
Programs (Optional)
Your hearing instruments may have a push-button for switching between different programs.
Push briefly on the button to switch between programs.
Your hearing instrument can have up to 4 different programs. When switching between
the different programs, your hearing instrument will beep. The number of beeps will
indicate which program you are using.
e
One beep, when you switch to program 1
ee
Two beeps, when you switch to program 2
eee
Three beeps, when you switch to program
eeee
Four beeps, when you switch to program 4
Loading...