oticon ConnectLine Digital Office Phone Kit Easy Setup Instructions

Oticon ConnectLine

Digital Oce Phone Kit

Easy Setup Instructions

These instructions guide you through setting up ConnectLine’s digital
office phone solution. There are two methods for installation:

1. Hard-wired setup

2. Wireless setup

1. HARD-WIRED SETUP METHOD

AUX cabl e

Sennh eiser box & coiled p hone cable

If your digital office phone has a headset por t, you can also set up the digital office phone kit using this
functionality. Instructions for this method are available in the Produc t Literature section at
www.oticonusa.com/connectline in the booklet called “Digital Office Phone Kit Setup Guide.”

Setup Instructions

Step 1 Step 2

Step 4Step 3

Inser t coiled cabl e into the back p ort of the
Sennheiser box as pictured.

Remove p hone receive r cord from
phone b ase & replace w ith coiled cab le from
Sennh eiser box. The co iled phone ca ble will
now conn ect the Senn heiser box and p hone
base.

Inser t phone rece iver cord into f ront of
Sennheiser box.

Inser t the AUX cabl e into the hea dset jack on
the Sen nheiser dev ice as pictu red. Plug th e
mini jac k end into Strea mer Pro.

*

Handling calls using the hard-wired setup method:

• No alerts will be heard through the hearing instruments. (the ring

sounds on the phone only)

• Make sure the AUX input is selected on Streamer Pro. Press the AUX

button if necessary. (note: not the phone button)

• Ensure the phone button on the Sennheiser box is in the up position.

(not pressed down)

• When a call comes through, pick up the phone receiver and place it on

the desk or table surface. Conduct the conversation through the
Streamer Pro as usual. Replace the receiver when through.

• For outgoing calls, lift the receiver and place it on the desk or table

surface. Dial the number and the call will go through. Replace the
receiver when the call is ended.

*Ensur e Streamer Pr o is around th e user’s ne ck

(Before beginning, insert the included batter y into the Sennheiser device.)

You will use Streamer Pro in conjunction with
the Sennheiser box, coiled phone cable, and AUX
cable, pictured below:

Control settings on the bottom
of the Sennheiser box:

• Set the ABC switch to the

position that provides the
best sound quality.

• Rotate the small volume

control dial to achieve the
best balance of sound quality
and volume for both par ties.

*Ensur e Streamer Pr o is around th e user’s ne ck.

2. WIRELESS SETUP METHOD

AUX cabl e

Sennh eiser box & coiled p hone cable

Phone A daptor 2.0 & powe r source

Setup Instructions

Connec t the power supply and mini
jack end of the AUX cable to the
Phone Adapter 2.0 as pictured.

Step 1

Ensure t he Phone Adapte r 2.0 is plugged in
and has be en paired with t he Streamer Pro.
You can now hand le calls wireles sly with
St re ame r Pr o.*

Step 3

Follow steps 1-3 from the hard-wired
setup instructions (opposite side).
Then, connect the AUX cable to the
Sennheiser box as pictured.

Step 2

15500 -2834 / 05.13

Handling calls using the wireless setup method:

• No alerts will be heard through the hearing instruments.

(the ring sounds on the phone only)

• Ensure the phone button on the Sennheiser box is in the up position. (not

pressed down)

• When the phone rings, press the Phone button on Streamer Pro first. Wait

until you see a green and blue light on the Phone Adapter 2.0.

• Pick up the receiver and place it on the desk or table surface. Conduct the

conversation through the Streamer Pro as usual. When finished, replace
the receiver and push the Phone button in Streamer Pro to end the wireless
connection.

• For outgoing calls, press the Phone button on Streamer Pro to establish the

wireless connection. Pick up the receiver, set it down, and dial the number.
The call will go through. When finished, replace the receiver and press the
Phone but ton on Streamer Pro to end the wireless connec tion.

Digital Oce Phone Kit

Easy Setup Instructions

(Before beginning, insert the included batter y into the Sennheiser device.)

You will use Streamer Pro in conjunction with the
Phone Adapter 2.0 & power source, Sennheiser
box, coiled phone cable, and AUX cable, pictured
below:

Control settings on the bottom
of the Sennheiser box:

• Set the ABC switch to the

position that provides the
best sound quality.

• Rotate the small volume

control dial to achieve the
best balance of sound quality
and volume for both par ties.