Other 5548330, 5487903 Instruction manual

Page 1
Mesh Gas Lift Chair
Assembly Instructions - Please keep for future reference
548/7903 554/8330
Dimensions
Width - 41cm
Height - 75-87cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Issue 1 - 11/11/16
Page 2
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the components and tools listed on the following pages.
• Remove all fittings from the plastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts before starting.
Care and maintenance
• Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
• From time to time check that there are no loose screws on this unit.
• During assembly do not stand or put weight on the product, this could cause damage.
• Assemble the item as close to its final position (in the same room) as possible.
• Assemble on a soft level surface to avoid damaging the unit or your floor.
• Parts of the assembly will be easier with 2 people.
• Do not stand on the chair.
• Do not use this chair as step ladder.
• This product should not be discarded with household
• We do not recommend the use of power drill/drivers for
inserting screws, as this could damage the unit. Only use hand screwdrivers.
• Unit weight: 5kgs.
• Maximum safe weight of user: 110kgs.
waste. Take to your local authority waste disposal centre.
Handy Hints
• Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
• Regularly check and ensure that all bolts and fittings are tightend properly.
1
Page 3
If you have damaged or missing components, call the
Components - Parts
Customer Helpline: Argos = 0345 6400800
Please check you have all the parts listed below
Backrest
1 Chair lift plate
(36 x 39 x 16cm)
Gas lift
4 Base
(28/40 x Ø5cm)
2 Seat
(41 x 38.5 x 6.5cm)
5 Castor x 5
(Ø28 x 9cm)
3
(25.5 x 13.5 x 6cm)
6
(8 x 6.5 x 6.5cm)
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
A DB C
M6 x 35mm Bolt x 4 M6 x 16mm Bolt x 4 Washer x 4
Allen Key x 1
Ruler - Use this ruler to help correctly identify the screws
105
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
2
Page 4
Assembly Instructions
Step 1
Attaching backrest
Place the seat upside down on a raised, flat and protected surface.
Position the backrest on the seat as shown.
Secure using bolts then tighten bolts using allen key .
D
2
1
A
A
2
A
A
2
A
A
1
A
1
Step 2
Attaching mounting plate
Position the mounting plate onto the seat as shown.
Secure using bolts and washers then tighten bolts using allen key .
3 2
Important:
Make sure to correctly position the lever at the right side of the seat as shown.
B
C
D
Lever
Arrow
B
C
B
C
3
2
B
C
B
C
B
C
3
B
C
B
B
C
2
C
3
Page 5
Assembly Instructions
Step 3
Attaching castors
Place the base upside
5
down on a flat protected surface. Attach the castors into holes on
6
the base and secure by pressing down firmly.
6
6
6
5
6
6
Step 4
Attaching gas lift
Place the base on a flat protected surface. Insert the gas lift into the hole on the base as shown and press firmly to secure.
Important:
Remove plastic tip cover on gas lift before assembling.
5
4
Plastic tip
4
5
4
Page 6
Assembly Instructions
Step 5
Attaching the seat
Position the seat as shown and insert the gas
4
lift into the mounting plate . Secure by pressing down the seat firmly.
3
3
4
Step 6
Gaslift operation
To adjust the seat higher, lift up the lever under the seat and release at desired height.
To lower the seat, lift up the lever while seated on the stool.
Assembly is complete.
Lever
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
5
Loading...