OSRAM QT-FQ Technical Information

QUICKTRONIC FLAT

QT-FQ 1x80/230-240 F / CW
QT-FQ 2x80/230-240 F / CW

Technical information

edition: January 2003

subject to change without any notes

Features

• 21mm height

• Lamp start with optimised filament preheat within 1 sec.

• Suitable for applications in which lamps are switched on and off frequently

• Cut-off technology

• Automatic shutdown of lamps in the event of a defect and at the end of their life

• Automatic restart after lamp replacement

• Combi-Wiring (CW) terminals for manual or automatic wiring

• Suitable for luminaires with protection class I and II

• Suitable for emergency installations acc. to VDE 0108

Technical data:

reference

QT-FQ 1x80/230-240 F / CW * QT-FQ 2x80/230-240 F / CW

Lamps 1xFQ 80W / 1x DL 80W 2xFQ 80W / 2xDL 80W
Lamp wattage [W] 1x80 / 1x80 2x80/ 2x80
System wattage [W] 87.5 / 87.5 171 / 170
Line current [A]: 0.38 / 0.38 0.75 / 0.75
Luminous flux at 25°C [lm] 6150 / 6150 6150 / 6150
Luminous flux at 35°C [lm] 7000 / 7000 7000 / 7000
Wire preparation CW
terminals: [mm]

8.5 ... 9.5

Ignition time t < 1sec.
Line voltage [V] 230 ... 240 V
Voltage range (AC) 198 V … 264 V
Voltage range (DC) 198 V – 264 V
Line frequency [Hz] 50 … 60 Hz

Operating frequency: [kHz] ap. 45-50 kHz
Inrush current
Radio interference
suppression:

I

= 27A TH = 170µs IP = 39A TH = 260µs

P

acc. to EN 55015

Harmonic content: acc. to EN 61000-3-2
Immunity: acc. to EN 61547
Power factor

λ = 0.97 λ = 0.97
Temperature range ta: -20°C … +50°C
Case temperature tc: max. +70°C max. +75°C
Design (l x w x h) 360 x 30 x 21 mm 423 x 30 x 21 mm
Distance between
mounting holes:

350 mm 415 mm

Weight: 330 g 400g
Approval marks: