•optical efficiency: 45 lm/W (red),
55 lm/W (amber), 42 lm/W (yellow) at 1.4 A
•grouping parameter: luminous flux,
wavelength
•assembly methods: suitable for all
SMT
assembly methods
•soldering methods: reflow soldering
•preconditioning: acc. to JEDEC Level 2
•taping: 24-mm tape with 200/reel, ø180 mm
•ESD-withstand voltage: up to 2 kV acc. to
JESD22-A114-D
Anwendungen
•Außen und Innenbeleuchtung
•Notbeleuchtungen
•Signal- und Warnleuchten
•dekorative Beleuchtung
•Fassadenbeleuchtung im Innen- und
Aussenbereich
•Spotbeleuchtung/Kontrastreiche Beleuchtung
•Vitrinenbeleuchtung
2008-01-281
Applications
•indoor and outdoor lighting
•emergency lighting
•signal and symbol luminaire
•decorative lighting
•indoor and outdoor commercial and residential
architectural lighting
•spotlights
•glass carbinet lighting
Bestellinformation
Ordering Indormation
Typ
Type
Emissionsfarbe
Color of
Emission
Lichtstrom
1) Seite 15
Luminous Flux
IF = 1,4 A
Φ
(lm)
V
1) page 15
LR W5AP, LA W5AP, LY W5AP
Lichtstärke
Luminous
Intensity
IF = 1,4 A
IV (cd)
2) Seite 15
2) page 15
Bestellnummer
Ordering Code
LY W5AP-KYLZ-36yellow
LA W5AP-LXMY-24amber
LR W5AP-KZMX-1red
82.0 ... 180.0
112.0 ... 240.0
97.0 ... 210.0
38.0 (typ.)Q65110A7156
51.0(typ.)Q65110A7159
45.0 (typ.)Q65110A7158
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selek tionen. Dies e bestehen aus wen igen
Helligkeitsgruppen (siehe
Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LA W5AP-LXMY-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen LX, LY,
LZ, MX oder MY enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird
nur eine Wellenlängengruppe geliefert. Z.B.: LA
Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe
Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
W5AP-LXMY-24 bedeutet, dass auf dem Gurt nur eine der
Seite 5 für nähere Information).
Note:The above Type Numbers represent the o rder groups which incl ude only a few b rightness g roups (se e page 5
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each
reel). E.g. LA
reel.
In order to ensure availability, single brightness groups will not be orderable.
W5AP-LXMY-24 means that only one group LX, LY, LZ, MX or MY will be shippable for any one
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups
will be shipped on any one reel. E.g. LA
be shippable. In order to ensure availability, single wavelength groups will not be orderable (see
explanation).
W5AP-LXMY-24 means that only 1 wavelength group -2, -3, or -4 will
page 5 for
Vergleichstabelle
Correlation Table
Typ
Type
Lichtstrom
Luminous Flux
1) Seite 15
1) page 15
IF = 1,4 A
Φ
(lm)
V
LY W5AP-KYLZ-36
LA W5AP-LXMY-24
LR W5AP-KZMX-1
82.0 ... 180.0 183.4
112.0 ... 240.0 234.1
97.0 ... 210.0 202.6
2008-01-282
Typischer Lichtstrom
Typical Luminous Flux
2) Seite 15
2) page 15
IF = 2 A
Φ
(lm)
V
Grenzwerte
Maximum Ratings
(TA=25°C)
LR W5AP, LA W5AP, LY W5AP
Bezeichnung
Parameter
Betriebstemperatur
Operating temperature range
Lagertemperatur
Storage temperature range
Sperrschichttemperatur
Junction temperature
Sperrschichttemperatur
Junction temperature
Durchlassstrom
Forward current
(TA=25°C)
Stoßstrom
Surge current
t ≤ 10 μs, D = 0.1; T
Sperrspannung
Reverse voltage
=25°C
A
(TA=25°C)
Symbol
Symbol
T
op
T
stg
T
j
T
j
I
F
I
FM
V
R
Werte
Values
– 40 … + 150°C
– 40 … + 150°C
160°C
175 fort short term
applications
2.0A
4.0A
not designed for
reverse operation
Einheit
Unit
°C
V
Leistungsaufnahme
Power consumption
(TA=25°C)
Wärmewiderstand
Thermal resistance
Sperrschicht/Lötpad (max.)
Junction/solder point (typ.)
P
R
R
tot
th JS
th JS
7.5W
5
3
K/W
K/W
2008-01-283
Kennwerte
Characteristics
(TA = 25 °C)
LR W5AP, LA W5AP, LY W5AP
Bezeichnung
Parameter
Wellenlänge des emittierten Lichtes(typ.)
Wavelength at peak emission
I
= 1,4 A
F
Dominantwellenlänge
Dominant wavelength
I
= 1,4 A(max.)
F
Spektrale Bandbreite bei 50 % Φ
Spectral bandwidth at 50 % Φ
I
= 1,4 A
F
3) Seite 15
3) page 15
rel max
rel max
(min.)
(typ.)
(typ.)
Abstrahlwinkel bei 50 % ΙV (Vollwinkel)(typ.)
Viewing angle at 50 % Ι
Durchlassspannung
Forward voltage4)
I
= 1,4 A (max.)
F
V
4) Seite 15
page 15
(typ.)
(min.)
Sperrstrom
Reverse current (max.)
Temperaturkoeffizient von λ
Temperature coefficient of λ
I
= 1,4 A; 25°C ≤ T≤ 125°C
F
Temperaturkoeffizient von V
Temperature coefficient of V
I
= 1,4 A; 25°C ≤ T≤ 125°C
F
dom
dom
F
F
(typ.)
(typ.)
Optischer Wirkungsgrad(typ.)
Optical efficiency
I
= 1,4 A
F
* Einzelgruppen siehe Seite 5
Individual groups on page 5
Symbol
Symbol
Werte
Values
Einheit
Unit
yellowamberred
λ
λ
λ
λ
peak
dom
dom
dom
593623634nm
583
590*
595
612
617*
624
620
625
632
nm
nm
nm
Δλ181818nm
2ϕ140140140Grad
deg.
V
F
V
F
V
F
I
R
I
R
TC
TC
η
opt
λdom
V
2.2
2.5
2.9
2.2
2.5
2.9
2.2
2.5
2.9
not designed for
V
V
V
reverse operation
0.100.080.08nm/K
-2.0-2.0-2.0mV/K
425545lm/W
2008-01-284
LR W5AP, LA W5AP, LY W5AP
Wellenlängengruppen (Dominantwellenlänge)
Wavelength Groups (Dominant Wavelength)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
5
Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note:The standard shipping format for serial types includes a family group of 5 individual brightness groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: LX-3
Example: LX-3
Helligkeitsgruppe
Brightness Group
Wellenlänge
Wavelength
LX3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen für jede Selektion enthalten.
Note:No packing unit / tape ever contains more than one group for each sele ction.
2008-01-285
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.