OSRAM LR W5SN, LA W5SN, LY W5SN Technical data

®
Platinum DRAGON Enhanced thin film LED
Lead (Pb) Free Product - RoHS Compliant
LR W5SN, LA W5SN, LY W5SN
Vorläufige Daten / Preliminary Data
Gehäusetyp: weißes SMD-Gehäuse, farbloser klarer Silikon - Verguss
Typischer Lichtfluss: 75 lm (rot), 89
lm (amber), 61 lm (gelb) bei 1000 mA
Besonderheit des Bauteils: Punktlichtquelle mit
hoher Lichtausbeute bei geri
ngem Platzbedarf
Wellenlänge: 625 nm (rot), 617 nm (amber),
nm (gelb)
590
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: Dünnfilm InGaAlP
optischer Wirkungsgrad: 60 lm/W (rot),
lm/W (amber), 44 lm/W (gelb) bei 100 mA
74
Gruppierungsparameter: Lichtstrom, Wellenlänge
Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet
Lötmethode: IR Reflow Löten
Vorbehandlung: nach JEDEC Level 4
Gurtung: 24-mm Gurt mit 800/Rolle, ø180 mm
ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B
Anwendungen
• Verkehrssignale
• Hinterleuchtung (Werbebeleuchtung, Allgemeinbeleuchtung)
• Innen- und Außenbeleuchtung im Automobilbe­reich, z. B. Instrumentenbeleuchtung, Heckleuchte
• Ersatz von Kleinst-Glüh lampen
• Tragbare Beleuchtung z. B. am Fahrrad
• Dekorative Lichtleiter-Anwendungen
• Signal- und Symbolleuchten zur Orientierung
• Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.)
• Fassadenbeleuchtung im Innen- und Außenbereich
• Hinterleuchtung für LC-Displays

Features

package: white SMD package, colorless clear silicone resin
typical Luminous Flux: 75 lm (red), 89
lm (amber), 61 lm (yellow) at 1000 mA
feature of the device: point lightsource with high luminous efficiency and low space
wavelength: 625 nm (red), 617 nm (amber), 590 nm (yellow)
viewing angle: Lambertian Emitter (120°)
technology: Thinfilm InGaAlP
optical efficiency: 60 lm/W (red), 74 lm/W (amber), 44 lm/W (yellow) at 100 mA
grouping parameter: luminous flux, wavelength
assembly methods: suitable for all SMT
assembly methods
soldering methods: IR reflow soldering
preconditioning: acc. to JEDEC Level 4
taping: 24-mm tape with 800/reel, ø180 mm
ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B
Applications
• traffic signaling
• backlighting (illuminated advertising, general lighting)
• Interior and exterior automotive lighting e.g. dashboard backlighting, rear combination lamp (RCL)
• substitution of micro incandescent lamps
• portable light souce (e. g. bicycle)
• decorative and entertainment lighting (incl. fiber optic illumination)
• signal and symbol luminaire for orientation
• marker lights (e.g. steps, exit ways, etc.)
• indoor and outdoor commercial and residential architectural lighting
LCD backlighting
2006-09-05 1
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN

Bestellinformation Ordering Indormation

1) Seite 17
Typ
Type
LA W5SN-HZJZ-24 LA W5SN-JYKY-24
LR W5SN-HYJY-1 LR W5SN-JXKX-1
LY W5SN-HYJZ-35 LY W5SN-HZKX-46
Emissions­farbe Color of Emission
Lichtstrom
Luminous
1) page 17
Flux
IF = 700 mA Φ
(mlm)
V
amber 39.000 ... 71.000
52.000 ... 97.000
red 33.000 ... 61.000
45.000 ... 82.000
yellow 33.000 ... 71.000
39.000 ... 82.000
Lichtstärke
Luminous Intensity
IF = 700 mA
IV (mcd)
18.500 (typ.)
25.000 (typ.)
15.700 (typ.)
21.000 (typ.)
16.100 (typ.)
18.800 (typ.)
2) Seite 17
2) page 17
Bestellnummer
Ordering Code
on request on request
on request on request
Q65110A5711 Q65110A5712
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Se lektionen . Diese besteh en aus wenigen
Helligkeitsgruppen (siehe Gurt geliefert. Z.B.: LA W5SN-JYKY-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen JY, JZ, KX oder KY enthalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlängengruppe geliefert. Z.B.: LA Wellenlängengruppen -2, -3, oder -4 enthalten ist (siehe Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation).
W5SN-JYKY-24 means that only one group JY, JZ, KX or KY will be shippable for any one reel.
Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
W5SN-JYKY-24 bedeutet, dass auf dem Gurt nur eine der
Seite 5 für nähere Information).
W5SN-JYKY-24 means that only 1 wavelength group -2, -3, or -4 will

Vergleichstabelle Correlation Table

1) Seite 17
Typ Type
LA W5SN-HZJZ-24 LA W5SN-JYKY-24
LR W5SN-HYJY-1 LR W5SN-JXKX-1
LY W5SN-HYJZ-35 LY W5SN-HZKX-46
Lichtstrom Luminous Flux
IF = 700 mA Φ
(mlm)
V
39.000 ... 71.000
52.000 ... 97.000
33.000 ... 61.000
45.000 ... 82.000
33.000 ... 71.000
39.000 ... 82.000
1) page 17
Typischer Lichtstrom Typical Luminous Flux
IF = 1000 mA Φ
(mlm)
V
70.800
96.100
60.600
81.300
62.300
74.500
2) Seite 17
2) page 17
2006-09-05 2
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Grenzwerte Maximum Ratings
(TA=25°C)
Bezeichnung Parameter
Betriebstemperatur Operating temperature range
Lagertemperatur Storage temperature range
Sperrschichttemperatur Junction temperature
Durchlassstrom Forward current (min.) (TA=25°C)
Stoßstrom Surge current
t10 µs, D = 0.1; T
Sperrspannung Reverse voltage
=25°C
A
(TA=25°C) Leistungsaufnahme
Power consumption (TA=25°C)
Wärmewiderstand Thermal resistance Sperrschicht/Lötpad Junction/soldering point
4) Seite 17
4) page 17
Symbol Symbol
T
op
T
stg
T
j
I
F
I
F
I
FM
V
R
P
tot
R
th JS
Werte
Values
– 40 … + 125 °C
– 40 … + 125 °C
+ 135 °C
1000
100
2500 mA
not designed for
reverse operation
3.4 W
9
Einheit Unit
mA mA
V
K/W
2006-09-05 3
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Kennwerte Characteristics
(TA = 25 °C)
Bezeichnung Parameter
Wellenlänge des emittierten Lichtes (typ.) Wavelength at peak emission
I
= 700 mA
F
Dominantwellenlänge Dominant wavelength
I
= 700 mA (max.)
F
Spektrale Bandbreite bei 50 % Φ Spectral bandwidth at 50 % Φ
I
= 700 mA
F
5) Seite 17
5) page 17
rel max
rel max
(typ.)
Abstrahlwinkel bei 50 % ΦV (Vollwinkel) (typ.) Viewing angle at 50 % Φ
Durchlassspannung Forward voltage6)
I
= 700 mA (max.)
F
V
6) Seite 17
page 17
(typ.)
Sperrstrom Reverse current (max.)
Temperaturkoeffizient von λ Temperature coefficient of λ
I
= 700 mA; –10°C T 100°C
F
Temperaturkoeffizient von λ Temperature coefficient of λ
I
= 700 mA; –10°C T 100°C
F
Temperaturkoeffizient von V Temperature coefficient of V
I
= 700 mA; –10°C T 100°C
F
peak peak
dom dom
F
F
Optischer Wirkungsgrad (typ.) Optical efficiency
I
= 700 mA
F
max. Optischer Wirkungsgrad max. Optical efficiency (typ.)
I
= 100 mA
F
* Einzelgruppen siehe Seite 5
Individual groups on page 5
Symbol Symbol
Werte
Values
red amber yellow
(min.)
(typ.)
λ
peak
λ
dom
λ
dom
λ
dom
632 624 597 nm
620 625 632
612 617* 624
∆λ 18 18 18 nm
2ϕ 120 120 120 Grad
(min.)
(typ.)
(typ.)
(typ.)
V
F
V
F
V
F
I
R
I
R
TC
TC
TC
η
opt
η
opt max.
2.1
2.5
3.3
2.1
2.5
3.3
not designed for
reverse operation
0.14 0.14 0.12 nm/K
λpeak
0.08 0.08 0.10 nm/K
λdom
– 2.5 – 2.5 – 2.5 mV/K
V
38 47 21 lm/W
60
74
583 590* 595
2.1
2.5
3.3
44
Einheit Unit
nm nm nm
deg. V
V V
lm/W
2006-09-05 4
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
5) Seite 17
1) Seite 17
1) page 17
Wellenlänge Wavelength
gelb
yellow
Einheit Unit
Lichtstärke
2) Seite 17
Luminous Intensity
2) page 17
IV (mcd)
12000 (typ.) 14000 (typ.) 16200 (typ.) 18800 (typ.) 22000 (typ.) 25500 (typ.) 30000 (typ.)
Wellenlängengruppen (Dominantwellenlänge) Wavelength Groups (Dominant Wavelength)
Gruppe Group
min. max. min. max.
2 612 616 nm 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm
amber amber
5) page 17)

Helligkeits-Gruppierungsschema Brightness Groups

Helligkeitsgruppe Brightness Group
HY HZ JX JY JZ KX KY
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
Helligkeitsgruppen.
4 Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of 4 individual brightness groups.
Individual brightness groups cannot be ordered.
Lichtstrom Luminous Flux
Φ
(mlm)
V
33000 … 39000 39000 … 45000 45000 … 52000 52000 … 61000 61000 … 71000 71000 … 82000 82000 … 97000
Gruppenbezeichnung auf Etikett Group Name on Label
Beispiel: JY-3 Example: JY-3
Helligkeitsgruppe Brightness Group
JY 3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppen für jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection.
2006-09-05 5
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
2) Seite 17
Relative spektrale Emission Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Φ
= f (λ); TA = 25 °C; IF = 700 mA
rel
100
%
Φ
V
80
2) page 17
OHL11701
V
λ
60
40
20
0
400
Abstrahlcharakteristik Radiation Characteristic
Φ
= f (ϕ); TA=25°C
rel
50˚
60˚
70˚
80˚
yellow amber
red
450 500 550 600 650 700
nm
λ
2) Seite 17
2) page 17
10˚20˚40˚ 30˚
ϕ
1.0
0.8
0.6
0.4
0.2
OHL01660
90˚
100˚
1.0 0.8 0.6 0.4
2006-09-05 6
20˚ 40˚ 60˚ 80˚ 100˚ 120˚
0
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Durchlassstrom Forward Current
I
= f (VF); TA = 25 °C
F
2) Seite 17
2) page 17
2000
mA
I
F
3
10
5
2
10
5
1
10
1.5
1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.3
Relative Spannung Relative Voltage
VF = VF - V
(25 °C)
F
2) page 17
0.30 V
V
F
0.20
0.15
0.10
0.05
OHL02681
V
2) Seite 17
= f (Tj); IF = 700 mA
F
OHL02985
Relativer Lichtfluss
2)7) Seite 17
Relative Luminous Flux
Φ
(700 mA) = f (IF); TA = 25 °C
V/ΦV
Φ
Φ
V (700 mA)
V
1
10
V
V
0
10
2) 7) page 17
OHL12619
5
-1
10
V
Relativer Lichtstrom Relative Luminous Flux
Φ
V/ΦV(25 °C)
1
1010
5
2) Seite 17
2) page 17
= f (Tj); IF = 700 mA
2.5
Φ
V
Φ
V (25 ˚C)
mA210
OHL12880
3
I
F
2.0
yellow
1.5
amber red
1.0
0
-0.05
-0.10
-60
-40 -20 0 20 ˚C6040
100
T
j
2006-09-05 7
0.5
0
-60
-40
-20 0 20 40 60
˚C
100
T
j
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Dominante Wellenlänge Dominant Wavelength LR, λ
= f (IF); TA = 25 °C
dom
627.5 nm
λ
dom
626.5
626
625.5
625
624.5
624
623.5
0
400 800 1200 1600
Dominante Wellenlänge Dominant Wavelength LY, λ
= f (IF); TA = 25 °C
dom
591.5 nm
λ
dom
2)
Seite 16
2) page 16
2)
Seite 16
2) page 16
OHL02618
Dominante Wellenlänge Dominant Wavelength LA, λ
= f (IF); TA = 25 °C
dom
619.5
nm
λ
dom
2)
Seite 16
2) page 16
OHL02617
618.5
618
617.5
617
616.5
616
615.5 0
mA
I
F
OHL02911
400 800 1200 1600
mA
I
F
590.5
590.0
589.5
589.0
588.5
588.0 0
200 400 600 800 mA 1200
I
F
2006-09-05 8
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Dominante Wellenlänge Dominant Wavelength LR, λ
= f (Tj); IF = 700 mA
dom
630
nm
λ
dom
628
626
624
622
620
618
-60
-40 -20 0 20 40 60 100
Dominante Wellenlänge Dominant Wavelength LY, λ
= f (Tj); IF = 700 mA
dom
598
nm
λ
dom
596
2)
Seite 16
2) page 16
2)
Seite 16
2) page 16
OHL02680
Dominante Wellenlänge Dominant Wavelength LA, λ
= f (Tj); IF = 700 mA
dom
622
nm
λ
dom
2)
Seite 16
2) page 16
OHL02679
620
618
616
614
612
610
-60
˚C
T
j
OHL02879
-40 -20 0 20 40 60 100
˚C
T
j
594
592
590
588
586
584
-60
-40 -20 0 20 40 60 100
˚C
T
j
2006-09-05 9
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Maximal zulässiger Durchlassstrom Max. Permissible Forward Current
I
= f (TS)
F
1100
mA
I
F
900
800 700 600
500 400 300
200 100
Do not use current below 100 mA
0
020 806040 100 140˚C
OHL02947
T
Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 25 °C
Exemplarische durchschnittliche Lebens­dauerfür mittlere Helligkeitsgruppe Exemplary median Lifetime
2) page 17
2)
Seite 17
for median Brightness Group
Bedingungen
Conditions
mittlere Lebensdauer median
Einheit
Unit
Lifetime
IF = 500 mA TS = 25°C
IF = 1000 mA TS = 85°C
IF = 750 mA TS = 125°C TJ = 150°C
IF = 750 mA TS = 150°C TJ = 175°C
50.000 Betriebsstunden operating hours
30.000 Betriebsstunden
operating hours
1.000 Betriebsstunden
operating hours
100 Betriebsstunden
operating hours

*The emitter die exhibits excellent performance but slight package discoloration occurs at highest temperatures.

Zulässige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability
Duty cycle D = parameter, TS = 85 °C
2006-09-05 10
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
8) Seite 17
Maßzeichnung Package Outlines
8) page 17
0...0.1 (0.004)
6.2 (0.244)
5.8 (0.228)
4.25 (0.167)
A
C
Heat sink
Protection Diode
4.15 (0.163)
ø0.81 (0.031)
ø0.73 (0.028)
(R0.85 (0.033))
1.9 (0.075)
1.7 (0.067)
Cathode
5.35 (0.210)
5.25 (0.206)
11.2 (0.441)
Kathodenkennung: Markierung Cathode mark: mark Gewicht / Approx. weight: 0.2 g
Gurtung / Polarität und Lage Method of Taping / Polarity and Orientation
8) Seite 17
8) page 17
Verpackungseinheit 800/Rolle, ø180 mm Packing unit 800/reel, ø180 mm
Cathode/Collector Side
4 (0.157)
1.55 (0.061)
2 (0.079)
1.75 (0.069)
11.5 (0.453)
0.3 (0.012)
12.4 (0.488)
1.2 (0.047)
0.8 (0.031)
10.8 (0.425)
1.1 (0.043)
0.9 (0.035)
2.0 (0.079)
1.6 (0.063)
0.3 (0.012)
0.29 (0.011)
0.24 (0.009)
0.65 (0.026)
0.45 (0.018)
(ø4.2 (0.165))
7.35 (0.289)
6.8 (0.268)
7.2 (0.283)
GPLY6147
6.35 (0.250)
8 (0.315)
2006-09-05 11
24 (0.945)
1.9 (0.075)
OHAY0508
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Empfohlenes Lötpaddesign Recommended Solder Pad
Achtung:
Anode und
Heatsink sind
elektrisch
verbunden
Attention:
Anode and
Heatsink are
electrically connected
Footprint
Empfohlene
Padgeometrie
8) Seite 17
8) page 17
1.6 (0.063)
3 solder points
IR-Reflow Löten IR Reflow Soldering
Thermisch optimiertes PCB3 Lötstellen Thermal enhanced PCB
11.6 (0.457)
ø4.0 (0.157) Heatsink attach
12.0 (0.472)
11.6 (0.457)
2.3 (0.091)
Recommended
Solder Pad
Design
0.3 (0.012)
ø4.0 (0.157) ø2.5 (0.098)
Lötstopplack Solder resist
Lötpasten Schablone Solder paste stencil
Bare Copper Freies Kupfer
2006-09-05 12
Kupfer Copper
2.3 (0.091)
10 (0.394)
1.6 (0.063)
OHPY2844
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Lötbedingungen Vorbehandlung nach JEDEC Level 4 Soldering Conditions Preconditioning acc. to JEDEC Level 4
IR-Reflow Lötprofil für bleifreies Löten (nach J-STD-020B) IR Reflow Soldering Profile for lead free soldering (acc. to J-STD-020B)
t
250
260 ˚C 245 ˚C
235 ˚C
OHLA0687
+0 ˚C
-5 ˚C ±5 ˚C
+5 ˚C
-0 ˚C
s
300
300
˚C
255 ˚C
250
T
200
150
100
240 ˚C
217 ˚C
Ramp Up
3 K/s (max)
50
25 ˚C
0
0
50
Maximum Solder Profile
Recommended Solder Profile
Minimum Solder Profile
120 s max
100
150
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning
30 s max
100 s max
200
10 s min
Ramp Down 6 K/s (max)
2006-09-05 13
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN

Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL)

Gurtverpackung Tape and Reel

OSRAM Opto
Semiconductors
(6P) BATCH NO: Batch Number
(X) PROD NO: Product Code
D
0
Direction of unreeling
Bar Code
Lot Number(1T) LOT NO: (9D) D/C: Date Code
Bar Code
Bar Code
P
0
P
2
FE
W
P
1
Bin1: Bin Information Color 1
Lx xxxx
Product Name
RoHS Compliant
Product Quantity per Reel(Q)QTY:
Sample
W
1
±0.25
13.0
A
N
Bin2: Bin3:
Temp ST
ML 2
260 C RT
Additional TEXT R077 DEMY PACKVAR: Packing Type
X - X - X(G) GROUP:
Forward Voltage Group
Wavelength Group
Brightness Group
OHA12043
Label
W
2
Gurtvorlauf: Leader:
Gurtende: Trailer:
Direction of unreeling
400 mm 400 mm
160 mm 160 mm
OHAY0324
Tape dimensions in mm (inch)
W P
+ 0.3
24
– 0.1
0
4 ± 0.1 (0.157 ± 0.004)
P
1
8 ± 0.1 (0.315 ± 0.004)
P
2
2 ± 0.1 (0.079 ± 0.004)
D
0
1.5 + 0.1 (0.059 + 0.004)
E F
1.75 ± 0.1
(0.069 ± 0.004)
11.5 ± 0.1 (0.453 ± 0.004)
Reel dimensions in mm (inch)
A W N
min
W
1
W
2 max
180 (7) 24 (0.945) 60 (2.362) 24.4 + 2 (0.961 + 0.079) 30.4 (1.197)
2006-09-05 14
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN

Trockenverpackung und Materialien Dry Packing Process and Materials

Moisture-sensitive label or print
L
E
V
l
E
e
e
b
e
L
a
s l
.
,
)
e
k d
n
H
o
a l
R
c
b
(
r f I
a
y
b
t
.
i d
H
i
R
m
u
%
h
0
e
6
e
/
v i
g
d
t
C
a
e
˚
a
r
l
k
a
0
c
e
r
S
r
3
f
E
N
a
s
R
n
_
p
<
V
i
n
I
%
i
O
f
k
0
T
o
s
a
o
T I
t
a
r
t
9
IO
e
.
S
u
s
C
s
n
d
)
r
r
<
p
o
n
N
o
e
U
T
(
e
o
u s
t
o
r
c
H
d
i
E
d
,
o
D
c
t
g
u
n
s
i
o
S
e
2
g
C
H
N
r
n
U
j
o
a
d
i
c
˚
7
a
u
b
s
O
n
E
8
H
e
o
b
5
C
u
s
o
4
t
C
A
R
˚
e
s
4
I
e
H
c
a
s
±
U
i
2
c
0
m
e
d
e
M
y
i
6
T
h
o
t
4
C
r
C
b r
E
m
h
˚
e
T
o
S
r
i
l
t
p
<
t
I
t
l
i
S
.
i
o
3
m
)
c
t
e
t
r
i
w
O
o
t
2
w
a
l
n
a
o
O
C
l
f
m
t
t
˚
r
i
M
e
.
F
o
T
a
l
t
s
t
l
a
a
o
e
c
a
h
a
P
r
i
r
F
l
h
o
t
t
l
d v
t
o
u
i
e
O
n
n
:
a
F
o
f
d
u
s
b
4
l
o
i
e
e
w
e
l
q
e
a
r
F
,
d
l
o
5
m
i
c
c
l
e
e
i
g
a
l
n
o
v
e
e
r
v
s
4
n
r
5
e
i
e
i
e
d
b
o
e
2
t
l
p
v
h
L
o
6
,
e
d
:
n
e
e
e
t
c
w
l
e
,
g
u
v
e
w
e
L
a
k
e
r
r
d
a
o
e
s
o
d
l
v
a
a
u
e
%
e
b
L
f
t
l
r
m
e
b
e
b
0
n
e
s
a
u
d
e
i
L
r
r
1
t
e
e
r
m
e
e
e
i
o
r
o
s
l
p
t
e
u
e
i
s
f
e
>
o
t
r
a
o
M
s
f
s
r
o
,
s
u
3
s
e
i
a
k
e
,
o
i
t
s
.
M
3
i
s
o
k
h
n
s
b
o
i
l
d
0
H
n
p
a
,
r
g
n
­M
l
o
F
-
i
a
R
g
n
a
r
a
l
b
i
D
M
n
e
o
b
b
f
i
h
C
r
f
T
i
t
i
%
p
k
i
f
(
l
a
.
r
.
s
S
I
i
t
0
a
r
a
s
f
-
e
o
p
w
l
h
e
t
v
1
a
k
b
J
t
Y
s
e
a
m
,
d
e
_
e
<
r
m
r
,
h
e
c
e
C
e
1
e
i
w
Y
u
r
t
t
t
e
t
d
i
S
t
E
d
o
o
o
a
f
n
e
l
>
u
1
y
W
.
r
f
n
n
D
u
i
H
A
q
I
d
1
d
e
e
4
o
u
.
e
E
r
s
o
e
8
y
i
r
q
r
J
t
m
2
e
b
M
i
i
6
/
e
o
t
s
b
d
t
1
)
r
m
:
e
C
i
r
i
e
2
a
t
S
d
s
c
P
o
r
m
m
i
i
e
I
r
i
)
e
o
t
o
v
u
l
o
b
n
g
m
e
r
e
i
F
H
o
a
e
n
t
c
l
i
o
D
e
2
)
p
n
r
t
k
F
o
.
l
a
o
)
e
o
a
a
r
3
F
b
o
d
b
e
1
l
e f
l
f
l
F
I
m
2
e
a
i
e
a
r
.
t
l
e
v
2
4
e
s
d
e
l
v
n
L
3
g
e
e
l
a
v
a
e
L
e
r
e
B
e
v
t
u
e
L
t
r
e
a
s
u
e
L
i
t
D
r
o
s
e
u
i
t
r
M
o
s
u
i
t
M
o
s i
M
o M
OSRAM
Desiccant
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.

Kartonverpackung und Materialien Transportation Packing and Materials

Barcode label
Do not eat. Avoid metal contact.
Discard if circles overrun.
bag opening.
Please check the HIC immidiately after
check dot
WET
Comparator
bake units
15%
examine units, if necessary If wet,
bake units
10%
examine units, if necessary If wet,
change desiccant
5%
parts still adequately dry. If wet,
MIL-I-8835 Humidity Indicator
Humidity indicator
Barcode label
OSRAM
OHA00539
S
r
N
E
s
R
V
n
%
I
i
O
0
o
T
a
t
T
I
t
9
IO
S
C
d
n
<
p
e
N
o
U
(
T
t
d
c
E
c
D
g
n
e
S
n
g
N
j
U
a
i
a
b
s
O
E
C
u
b
s
˚
C
A
R
s
e
c
I
s
c
U
i
0
e
y
M
o
4
T
h
r
C
b
r
E
o
T
S
l
p
<
t
l
I
S
.
i
c
t
t
)
O
w
a
n
a
C
O
f
t
˚
e
M
l
s
t
T
a
a
h
a
P
h
l
t
v
t i
e
n
O
:
u
s
f
b
o
i
e
w
q
e
r
a
,
l
o
m
c
e
l
i
g
n
e
r
e
v
4
n
e
i
b
o
d
e
2
t
h
,
o
d
:
n
e
w
c
,
g
u
w
e
r
d
a
o
o
s
l
%
a
e
b
f
m
b
e
0
b
n
e
d
r
r
1
e
e
m
e
e
i
r
o
l
p
t
e
f
>
e
o
a
o s
f
r
s
s
3
e
a
i
e
o
,
s
.
i
3
s
h
n
k
b
o l
d
0
H
p
a
n
,
g
r
n
­l
-
i
F
a
n
g
r
a
a
R
b
l
i
D
n
e
o
b
f
C
b
h
i
f
T
i
t
i
p
%
i
k
l
(
f
r
s
.
.
S
i
I
t
a
0
a
f
-
o
p
w
l
h
v
t
e
1
b
J
t e
,
a
m
d
_
r
<
m
,
h
e
c
e
e
C
w
i
r
e
t
t
t
t
d
i
S
t o
d
E
f
o
a
n
e
l
u
>
y
.
f
r
n
n
u
D
i
A
I
q
d
1
d
e
e
o
u
.
r
e
E
o
s
e
y
i
r
r
q
t
2
J
m
b
e
i
M
/
i
o
e
t
s
b
d
t
)
r
:
m
i
C
e
2
r
i
a
S
t
d
s
c
P
o
r
m
i
m
i
I
)
r
e
i
o
o
u
t
v
l
b
o
n
g
e
e
r
H
F
a
o
e
n
c
l
i
o
D
e
)
2
p
n
r
t
k
F
o
.
a
o
l
)
e
o
a
a
r
3
b
F
o
d
b
e
l
1 e f
l
f
l
F
I
m
e
2
a
i
e
r
a
.
t
l
e
v
2
4
e
s
d
e
l
v
3
n
L
g
e
e
l
a
v
a
e
L
e
r
e
B
e
v
t
u
e
L
t
r
e
a
s
u
e
L
i
t
D
r
o
s
e
u
i
t
r
M
o
s
u
i
t
M
o
s i
M
o
M
Barcode label
8
s
99
pto
r
1
o
t
O
c
02
u
0
d
1
n
2
o
:
4
c
O
3
i
SRAM
N
2
m
O
1
H
e
C
H
S
T
G
A B )
23
P
1
6
:
(
O N T O
L )
T 1 (
: O
N D O R
P ) X (
Packing Sealing label
2006-09-05 15
L
LEVE
If blan ar cod b
m u
h e v
i
g
d
t
a
e
a
r
l
k a
c
e
r
f
a
n
p
i k
o
a e
s
n o i t i
d n o
C
˚
3 2 t
a d a
d
e
c o r p
e
t
e
a
k
d
a
l a e
s , k
r a
r e
a
Y
e
e
1
e Y
1
W
H
4
8 6 1
e
e m i t
S
O
S
T
Y LS
O
lti T u M
4
1
0
: C / D ) D 9 (
245
1
0
0
11
el
. )
e lab
k, see
H R ( y
t
.
i d
H
i
R % 0
6
e
/ C ˚ 0 3
_
<
f
r
o , C ˚ 5
a
±
d h t i
w l
.
a
e
c i
r
t
u
n
4
e
l
d i
e
l v
s i
e
e
v
L
e
v
e
L
r
e
u
e
L
t
r
e
s
u
e
L
i
t
r
o
s
e
u
i
t
r
M
o
s
u
i
t
M
o
s i
M
o
M
s k
s
r u o
o t
s
p
r
o
O
t c
u
M
d
A
n
210021998
o
:
R
c
O
i
N
m
H
e
C
T A B ) P 6 (
O
N T O L
) T 1 (
0
2
­0
1
2
-
-
P
1
-
: 1
Q
T
n
:
i
S 2 B n
:
p i
R
3
B
m
in
C
6
e
B
T
7
0
C
2
6
2
L
D
0
4
M
E
2
0
L
6
2
2
a
P
2
3
d d A R
4
00 0 2
: Y T
Q ) Q (
Muster
o c e t
F
5
a 5 l e
l e v
G 3 2 1
:
P ) X (
R T R C
T l a n o i t i 7 7 0 C A P
e d
o o l o l F F
6
1 H
D O R
T X E R A V K
G (
. )
7 e
m
e i t
m r
i t
m r
i
t o
r
t
o
r
o l
o o l F
D
9
(
4 3 2
0
0
11
: O N
Y
M
E D
18 R
:
P
:
P
U O R G )
s r u
s
r o
u
s r
H
o
s
u
r
2
H
o
u
8
H
o
4
4
H
2
6
e
e m i
2
­1
­P 1
­: 1 Q
n
:
i
2
B
n : i 3
B
n i
6
B
7
6
D
T
M
E
Y
L
S
P
L
O
lti T u M
4
4
1
0
: C / D )
0 0 0 2
: Y T
Q ) Q (
245
1
Muster
-1
+Q
-1
Barcode label
0
0 2
­T S
p
R
m
Y
C
e
R
M
T
T
0
C
E
2
R
2 L
D
0
T
C
4
X
2 0
E
6
2
T
2
8
l
a
a
2
1
n o
R
i
3
-1
t i
:
d
Q
R
d
7
A
+
A
7
V
0
-1
K
R
C
P
:
A
P
P
U O R
G ) G (
OSRAM
OHA02044
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN
Revision History: 2006-09-05
Previous Version: 2006-08-17
Page Subjects (changes since last revision) Date of change
all datasheet complemented with yellow 2006-03-15
Anm.: Gemäß IEC 60825-1 (EN 60825-1) gilt: Note: According IEC 60825-1 (EN 60825-1):
LED RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
OHW02884
LED STRAHLUNG NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN
LED KLASSE 1M
OHW12884
Attention please!
The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in t he Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice yo u for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components OSRAM OS.
2006-09-05 16
9) page 17
may only be used in life-support devices or systems
10) page 17
with the express written approval of
Vorläufige Daten / Preliminary Data LR W5SN, LA W5SN, LY W5SN

Fußnoten:

1)
Helligkeitswerte werden mit einer Stromeinprägedauer von 25 Genauigkeit von ±
2)
Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische technische oder abgeleitete Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen oder abgeleiteten Werten unterscheiden können. F al ls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
3)
-
4)
Für weitere Informationen siehe Applikationsschrift im Internet (
5)
Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1
6)
Spannungswerte werden mit einer Stromeinprägedauer von 1 von ±0,05
7)
Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhältnis im Gleichstrom-Betrieb max. 5:1.
8)
Maße werden wie folgt angegeben: mm (inch)
9)
Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt.
10)
Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in
11% ermittelt.
www.osram-os.com).
V ermittelt.
ms und einer
nm ermittelt.
ms und einer Genauigkeit
Gefahr ist.

Remarks:

1.)
Brightness groups are tested at a current pulse duration of 25
2)
Due to the special conditions of the manufacturing processes of LED, the typical or calculated data of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical or calculated data of the typical characeristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
3)
-
4)
For further information please find the application note on our web site (
5)
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1
6)
Forward voltages are tested at a current pulse duration of 1
7)
In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1
8)
Dimensions are specified as follows: mm (inch)
9)
A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.
10)
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
ms and a tolerance of ± 11%.
www.osram-os.com).
nm.
ms and a tolerance of ±0.05 V.
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
2006-09-05 17
Loading...