Technical Information
r
r
Halogen reflector lamp for line voltage
HALOPAR 20
Product characteristics:
UV
UV
UVUV
Fi
Fillllte
ter
FiFi
terte
• Halogen lamp for line voltage without
need of transformer.
• 15% energy savings in comparison to
conventional reflector lamps.
• Brillant, white halogen light.
ALU
• Burner with UV-Filter glass. Meets the
most stringent UV protection thresholds
(NIOSH). Reduction of bleaching effect.
COOL BEAM
• Open operation permitted acc. to IEC
60598-1.
• Cut glass reflector optional in aluminium
or cool-beam version.
Cool-beam reflectors carry off thermal
radiation to the back of the lamp, so they
are especially appropriate for illuminating
thermally susceptible objects.
Range:
* Maximum permitted tol erance nominal value +8% acc. to IEC 60357.
Order-code
64832 SP (Alu)
64832 FL (Alu)
64836 SP (CB)
64836 FL (CB)
Voltage Wattage* Luminous
intensity
230/240V 50W 3000 cd 10° 2000h HAGS/UB-50-230-E27-64,5/10
„ „ 1000 cd 30° „ HAGS/UB-50-230-E27-64,5/30
„ „ 3200 cd 10° „ HRGS/UB-50-230-E27-64,5/10
„ „ 1100 cd 30° „ HRGS/UB-50-230-E27-64,5/30
Beam
angle
Lampe life ILCOS-code
HAL M-M, Edition 1/02
Subject to alteration 1/3
Light data:
Maintenance
Colour temperature
Bleaching effect
Light distribution
Geometry:
Technical Information
Halogen reflector lamp for line voltage
HALOPAR 20
Decrease of axial luminous intensity <20% after 75% of the nominal life time.
ALU: 2800 K ± 100
CB: 2800 K ± 100
Reduce up to 80% ( depending on the illuminated material) due to UV-absorbing glass.
OSRAM PHODAT database available on CD-ROM.
D
L
Values in mm Desig. HALOPAR 20
Overall length L max. 91,0 mm
Refl. diameter D max. 64,5 mm
Please note:
!
Dimensions and tolerances are subject to change within the IEC regulations!
Not explicitly given dimensions cannot be evaluated out of measuring lamp samples!
HAL M-M, Edition 1/02
Subject to alteration 2/3
Technical Information
Halogen reflector lamp for line voltage
HALOPAR 20
Temperature behaviour:
Max. permitted temperature
!
Operating conditions:
Burning position
Areas of application HALOPAR 20 is not suitable for exterior use.
Dimmable
Safety distance
!
Environment
Friendliness:
Standards:
Validity:
Burning position
acc. to 60432 - 1
Operating Temperature; free burning
50W
Measurement conditions:
Measurement in the mos t unfavourable burning position for the lamp.
Surrounding temperature: 25°C (ac c. to DIN 5032)
Voltage: 230V
Operating temperature for free burning use is not obliging and is useful for orientation
only.
any
100%
Please observe the minimum safe distance given on the luminaire.
The minimum safety distance for each luminaire typ has to be determined through the luminaire
manufacturer by appropriate measurements.
HALOPAR 20 be disposed as household waste.
All relevant IEC/DIN Standards are listed in the „Standards for halogen lamps“.
These technical information sheets (TI-sheets) are updated in irregular intervals. The user is
responsible to ensure that the information they have is up to date and still valid. Once a new TIsheet has been issued, former editions are to be seen as invalid and disposed of.
Cap temperature
Base up
210°C
160°C
HAL M-M, Edition 1/02
Subject to alteration 3/3
Loading...