
Instruction and Safety advice for OUTKIT version 21 x 30 
The housing is developed for electronic control gear (ECG) of OSRAM in a cross section of 21 x 30 mm in order 
to protect the ECG reliable of humidity in IP67. OUTKIT 
360 x 30 x 21 mm and OUTKIT 
consists of the square pipe (1) , two screw caps, bulk enclosed seal insert for the use of single wires and 2 pcs. 
caps (6).  
To ensure reliable operation in IP 67 it is necessary that you follow the construction and safety information as 
below: 
Instruction manual: 
•  To mount the cable screw you need toolings with a wrench size 15. 
•  Within OUTKIT, the ECG may be mounted with single wires or special ÖLFLEX 400P from company U.I.Lapp 
GmbH ( 
Below, please find the tested and approved types of cables and single wires: 
  Input side  Lamp side 
Wires 
Single wires 
  Input Side  Lamp Side 
Wires 
Single Wires 
•  For the use of dimmable ECGs you must use 2 additional wires at the input side.  
ÖLFLEX CLASSIC 400 P 4x 0.75 or 400 P 5 G 0.75. 
•  The cover caps (6) are put from outside into the two vents at the end of the ECG and secure the positioning  
of the ECG within the square pipe. 
•  Press the cover caps until block of the square pipe and secure it with the tooling of the wrench size 15: 
Safety instruction: 
1. No guarantee for the type of protection of the system if you use different cable manufacturers. 
2. If you use OUTKIT as a semiluminaire for lamps and for different light sources as well as for the use of different 
ECG brands, we do 
www.lappkabel.de) 
OUTKIT 21 short 
ÖLFLEX CLASSIC 400 P 2x0.75 for PC II or 
ÖLFLEX CLASSIC 400 P 3 G 0.75 for PC I 
H 05 V , max. diameter of 2.3 mm 
Incl. a seal insert 3x 2.3 
OUTKIT 21 long 
ÖLFLEX CLASSIC 400 P 2x0.75 for PC II or 
ÖLFLEX CLASSIC 400 P 3 G 0.75 for PC I 
H 05 V , max. diameter of 2.3 mm 
incl. seal insert 3x 2.3 
not take any warranty. 
®
21 long to protect 2lamp ECG in the dimensions of 423 x 30 x 21 mm. OUTKIT 
®
 21 short is to protect 1lamp ECG in the dimension of 
ÖLFLEX CLASSIC 
400 P 4x 0.75 
H05 V , max. diameter of 2mm 
incl. a seal insert 4x 2 
ÖLFLEX CLASSIC 
400 P 7x 0.5 
No opportunity for single wire 
connection