Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :1/(24)
Product Specification (80)
Revision Log
Rev Description Orig. By ECN # / Date
A New Spec Fakhariah
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :2/(24)
Product Specification (80)
CONTENT Page
Item
REVISION HISTORY
Revision Log
CONTENTS
1
2
3
4
5
5.1
5.1.1
5.1.2
5.1.3
5.1.4
5.1.5
TITLE
PURPOSE
SCOPE
REFERENCE DOCUMENTS
OTHER REQUIREMENT
Features, Functions, and Requirements
Product Summary
Part Number
Electrical Characteristics
Graphic Area Pixel Mapping
Duty Cycle
5.1.6 Interface Pin out 7
5.1.6.1 ZIF Connection Pin Out 7
5.1.7
5.1.8
5.1.9
5.1.10
5.1.10.1
5.1.10.2
5.2
5.2.1
5.2.2
5.3
5.3.1
5.3.2
Absolute Maximum Ratings
DC Characteristics of Complete Module
Power Consumption
AC Timing Characteristics
Parrallel Interface Timing Characteristics
Serial Interface Timing Characteristics
Display Programming
Programming
Initialization
Power Up and Down Sequence
Power Up Sequence
Power Down Sequence
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :3/(24)
Product Specification (80)
1. TITLE
1.1 Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
OS096064PK12MXXXXX
2. PURPOSE
2.1 This product specification is specifically for OLED Full Moon HX2XX.
3. SCOPE
3.1 This product specification is applicable to all HX2XX modules.
4.3 SOLOMON SSD0323 128 x 80, 16 Gray scale Dot Matrix OLED/PLED Segment/Common Driver
with Controller
5. OTHER REQUIREMENTS
5.1 FEATURES, FUNCTIONS, and REQUIREMENTS
5.1.1 Product Summary:
General OLED Module Description
Part Number OS096064PK12MXXXXX
Display Format 96 columns x 64 rows
Pixel Pitch 0.265 (W) x 0.265 (H) mm
Pixel Size 0.235 (W) x 0.235 (H) mm
Display Diagonal 1.2“
Color Monochrome – see table below for various colors
Grayscale 4 bits
Active Area 25.42 (W) X 16.94 (H) mm
Module size Varies. See next section.
Glass size 33.85 (W) X 28.19 (H) X 3.49 (T) mm, including polarizer
Driver IC SSD0323
Packaging/Interconnect COF/ZIF
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :5/(24)
Product Specification (80)
5.1.4 Graphic Area Pixel Mapping
Rows are designed in the interleave configuration. The COM re-map command allows for
proper orientation of the image displayed.
Pixel mapping and glass design layout (top plated contacts)
5.1.5 Duty Cycle
The rows are multiplexed and will operate at a nominal duty cycle of 1/64.The default duty
cycle is 1/80. A software command must be used to adjust during initialization.
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :6/(24)
Product Specification (80)
5.1.6 Interface Pin Out
There are two interface pin out options corresponding to the parallel and serial interface
requirements. The interface is factory-set by jumper JP1 on the FPC; JP1 = 1 for parallel
I/F, JP1 = 0 for serial I/F. For the parallel I/F version only, the user can select the interface
protocol using pin #3 BS1 (for Motorola 68 series or Intel 80 series).
7 D0 Parallel Data 0 SCLK Serial Clock Input
8 D1 Parallel Data 1 SDIN Serial Data Input
9 D2 Parallel Data 2 NC No connect
10 D3 Parallel Data 3 NC No connect
11 D4 Parallel Data 4 NC No connect
12 D5 Parallel Data 5 NC No connect
13 D6 Parallel Data 6 NC No connect
14 D7 Parallel Data 7 NC No connect
15 NC No connect NC No connect
16 VDD Logic Power VDD Logic Power
17 VCC OLED Power Supply VCC OLED Power Supply
18 VSS Ground VSS Ground
5.1.7 Absolute Maximum Ratings
Absolute Maximum Ratings
Symbol Description Range Unit
Parallel I/F Serial I/F
Parallel I/F protocol
Low: 68 series; High: 80 series
High: Data in GDDRAM
Low: Command
Read/Write selector for 68 series;
Write strobe for 80 series
E clock for 68 series;
RD strobe for 80 series
BS1
D/C#
NC No connect
NC No connect
Set to Low or connect to VSS
High: Data in GDDRAM
Low: Command
VDD Supply Voltage for logic -0.3 to +4.0 V
VCC/ VLL Supply Voltage for driver 0.0 to +16.0 V
Vin Input Voltage VSS-0.3 to VDD+0.4 V
Ta Operating Temperature -30 to +70 ºC
Tstg Storage Temperature Range -40 to +70 ºC
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :7/(24)
Product Specification (80)
5.1.8 DC Characteristics of Complete Module
(-30ºC to +70ºC Temperature Range, except as noted)
Recommended DC Operating Conditions
Description Symbol MIN TYP MAX Units
Operating voltage for logic VDD 2.4 3.0 3.5 V
OLED driver input voltage VCC 12.0 12.5 13.0 V
Operating Current (logic) IDD - - 650.0
Operating Current (OLED), All pixels
ON, Luminance at typical value
(100nits)
(1)
ICC
(2)
ICC
(3)
25.0 27.0 28.0 mA
ICC
17.0 18.0 20.0 mA
- 18.0 20.0 mA
Driver Sleep Mode Current (+25C) ISL - - 5.0
DC-DC Voltage converter input voltage
(Optional, not available in all p/n)
VDD - - - V
High VIH .8 *VDD - VDD V
Logic Input voltage
Low VIL 0 - .2*VDD V
Logic output
voltage
High (IOH=0.5mA)VOH .9 *VDD - VDD V
Low (IOL=0.5mA)VOL 0 - .1*VDD V
Note :
(1)
ICC
: operating current for :
H025X-OS096064PK12MY0AXX and HZ250-OS096064PK12MY1Z00
(2)
ICC
: operating current for :
H026X-OS096064PK12MY1AXX
ICC
(3)
: operating current for :
H12X0-OS096064PK12MXXA00
µA
µA
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :10/(24)
t
t
t
t
]
Parallel Interface Timing Diagram for 68 Series MPU
D/C#
CS#
RD#
WR#
D[7:0]
(Write data to driver)
D[7:0
(Read data from d river)
AS
F
PW
t
ACC
CSL
t
DSW
Valid Data
Valid Data
cycle
Parallel Interface Timing Diagram for 80 Series MPU
Product Specification (80)
AH
t
R
PW
CSH
t
DHW
t
DHR
t
OH
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :11/(24)
Product Specification (80)
5.1.10.2 Serial Interface Timing Characteristic
Serial Interface Timing Characteristics
Description Symbol Min. Typ. Max. Unit
Clock Cycle Time tcycle 250 - - ns
Address Setup Time tAS 150 - - ns
Address Hold Time tAH 150 - - ns
Chip Select Setup Time tCSS 120 - - ns
Chip Select Hold Time tCSH 60 - - ns
Write Data Setup Time tDSW 100 - - ns
Write Data Hold Time tDHW 100 - - ns
Clock Low Time tCLKL 100 - - ns
Clock High Time tCLKH 100 - - ns
Rise Time tR - - 15 ns
Fall Time tF - - 15 ns
Frame Frequency tFRM 70 75 85 Hz
Serial Interface Timing Diagram
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :12/(24)
Product Specification (80)
5.2 Display Programming
5.2.1 Programming
Refer to specification: Solomon SSD0323 OLED/PLED Segment/Common Driver with
Controller CMOS
5.2.2 Initialization
After power up, the commands specified in the Initialization Table below must be executed
during initialization
Set Re-map A0 00 52 52 52
Set Display Start Line A1 00 00 00 00
Set Display Offset A2 00 40 40 40
Set Multiplex Ratio A8 4F 3F 3F 3F
Set Display ON or OFF AE AF AF AF
Set Row Period B2 25 46 46 46
Set Master Configuration,
DC-DC
Set Bias Current Setting
for DC-DC
Set Pre-charge
Compensation Enable
Set Pre-charge
Compensation Level
AD 03 02 02 02
CF F0 default default default
B0 08 default default default
B4 00 default default default
Set Clock Divide B3 02 41 41 41
Set Phase Length B1
P1 = 3,
P2 = 5
P1 = 2, P2 = 2 P1 = 2, P2 = 2 P1 = 2, P2 = 2
Set VSL BF 0E 0D 0D 0D
Set VcomH BE 11 00 03 08
Set Vprecharge BC 18 0B 11 14
See Sample
Set Gray Scale Table
Gray Scale
Settings
Note: * All in Hex
Note: * This setting represents maximum luminance for proper operation of the display. Lower
setting can be used for dimming. Higher setting will adversely affect the operating lifetime as
defined in this specification.
Module
Module
Module
(A)
: H025X-OS096064PK12MY1AXX and HZ250-OS096064PK12MY1Z00
(B)
: H026X-OS096064PK12MY1AXX
(C)
: H12X0-OS096064PK12MXXA00
(A)
Initialization
For module
See Sample
Gray Scale
Settings
(B)
Initialization
For Module
See Sample
Gray Scale
Settings
(C)
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :13/(24)
Product Specification (80)
Sample Gray Scale Settings (Decimal)
GS level Phase 1 Phase 2 S/W Set GS Pulse Total DCLK
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :14/(24)
Product Specification (80)
5.3 Power Up and Power Down Sequence:
To protect the OLED panel and extend the panel life time, the driver IC power up/down routine
should include a delay period between high voltage and low voltage power sources turn on/off.
5.3.1 Power-Up Sequence:
I. Power-Up Vdd
II. After V
HIGH (logic HIGH)
III. After set RES# pin LOW (logic LOW), wait for at least 3us (t
IV. After V
30ms (t
5.3.2 Power-Down Sequence:
I. Send command AEh for Display off
II. Wait until panel discharges completely
III. Power down Vcc
IV. Wait for t
DD become stable, set RES# pin LOW (logic LOW) for at least 3us (t1) and then
2). Then Power ON VCC
CC become stable, send command AFh for display ON. SEG/COM will be ON after
AF).
Power-Up Diagram
OFF. Power OFF VDD. (where Minimum tOFF=0ms, Typical tOFF=30ms)
Power-Down Diagram
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
*Operating Lifetime is Time to Half Luminance; based on the display operated at 25°C at typical
brightness level with specified software settings, until reaching 50% of initial luminance.
5.4.1 Polarizing angle
Polarizing
axis
45°
Orientation of OLED polarizer angle
- 2000 -
- - +20 %
- None - -
- - 10 %
Typical Initial
Luminance, cd/m²
Min. Typ. Max
Retardation
axis
Operating
Lifetime *
Hours,
@25°C
-
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :16/(24)
Product Specification (80)
5.4.2 Mechanical Characteristics
5.4.2.1 Interconnections
The display module should be electrically connected to a controller on the
user’s board through the 18-contact pad ZIF tail.
5.4.2.2 Recommended Mating Connectors
5.4.2.2.1 Top Contact: HIROSE: FH12A-18S-0.5SH, or equilvalent
5.4.2.2.2 Bottom Contact: Molex: 52893-1890, HIROSE: FH12-18S-0.5SH,
or equilvalent
Orientation of ZIF connector tail pin out
5.4.2.3 Product Marking
Parts are marked as shown below in figure
OSXXXXXXXXXXXXX
HXXXX DYYWW
3mm
20mm
Legend
OSRAM P/N & Code
Date Code
D: Day; YY: Year
WW: PC Week
Description of part label marking requirements
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :17/(24)
Product Specification (80)
5.5 Module Mechanical Drawing
The mechanical drawings shown in below figures are provided for reference
Module drawing for parts with bezel
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :18/(24)
Product Specification (80)
Module drawing for parts without bezel
128 X 64
Active Area
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :19/(24)
6. QUALIFICATION TESTING
For reference, the main qualification tests and test criteria done on the OLED module are indicated
below in Tables, respectively
OLED Module Internal Qualification Tests
High Temperature and Humidity Bias
(THB)*
High Temperature Operating (ELT)* 70°C 336 hrs
Powered Temperature Cycle (PTC)*
Thermal Shock (TSK)
Low Temperature Storage (LTS) -40°C 336 hrs
High Temperature Storage (HTS) 70°C 336 hrs
Low Air PressureLAT **
Mechanical Vibration**
Mechanical Shock**
Mechanical Bump**
*Note 1: The modules are powered for these tests, with a standard OSRAM pattern (50% emission
ratio)
** Note 2: These mechanical tests are performed on a representative part of the same product family.
OLED Module Qualification Test Criteria
Test Condition Duration
Product Specification (80)
60°C / 90% RH 250 hrs
-30°C / 70°C; 30 min. dwell
time; 15 min. transition time
-40°C / 85°C; 45 min. dwell
time; 15 sec. Transition time
Peak
o
C
15kPa 25
(0.15bar)
10-58hz 0.75mm
58-150Hz 10g
1oct/min
11ms half sine
100g peak
6ms half sine 40g
60 cycles
100 cycles
16hrs
10 sweeps per X,
Y, Z direction
6 shocks per X, Y,
Z direction
1000 bumps per X,
Y, Z direction
Acceptance Criteria (without polarizer): Test Patterns for Powered Tests:
< 50% luminance loss after test
5 point luminance uniformity <20%
No mechanical failure
No electrical failure
Pixel gap (initial + growth) <
30% of pitch
Checkerboard pattern
Inverse Checkerboard pattern
All pixels On
All pixels Off
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :20/(24)
7. COSMETIC CRITERIA
Items Criterion for Defects Defect Type
Product Specification (80)
Black / bright spot,
particle, pin-hole (on
the glass / polarizer),
dent on polarizer
Within Viewing Area
Size Ф (mm) Acceptable number
Ф≤ 0.1 Not counted
0.1 ≤ Ф ≤ 0.2 3
Minor
Ф > 0.2 0
* Ф = (Long diameter + Short diameter)/2
Scratches / lines on
the polarizer
Within Viewing Area
Size Ф (mm) Acceptable number
Minor
W≤ 0.1 Not counted
L ≤ 2, 0.1 < W ≤ 0.2 3
W > 0.2 0
Minor
Polarizer Bubble
Reject if bubble is observed with naked eyes at 30cm distance.
with the following criteria
Within Viewing Area
Size Ф (mm) Acceptable number
Ф≤ 0.2 Not counted
0.2≤Ф≤ 0.3 3
0.3 < Ф 0
Outside Viewing Area – IGNORE
Polarizer coverage
Reject if the polarizer does not cover the Viewing Area.
Minor
Corner Chip
Criteria for Corner Chip
t = Glass thickness
Accept If
a ≤ 1.5 mm or
b ≤ 1.5 mm
c ≤ t
Minor
Corner Chip
Accept If
a ≤ 3.0 mm
or
b ≤ 3.0 mm
Minor
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :21/(24)
Product Specification (80)
)
Items Criterion for Defects Defect Type
Chip on contact pad
Chip on Face of
Display
Chip on Back of
Display
Definition of W & L & φ (Unit: mm
Criteria for Chips
on contact pad
t = Glass thickness
Accept if
b ≤ 1/3 width of
contact ledge
Criteria for Chips
on Face of Display
Accept if
b ≤ 1.5mm
Criteria for Chips
on Back of Display
Accept if
b ≤ 3.0 mm
Minor
Minor
Minor
Note: Distance between any two defects should be over 5 mm
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :22/(24)
8. GENERAL OLED MODULE HANDLING & CARE
8.1 Mechanical Handling
8.1.1 Avoid mechanical stress, such as shock and pressure. For parts designed without bezel,
exercise caution to avoid glass chipping. When handled with bare fingers, pay special
attention to sharp glass edges to avoid potential injury.
8.1.2 Avoid touching Flex contact pad with bare fingers and avoid mechanical stress and
pressure on the flex.
8.1.3 Handle the polarizer with care. Avoid hard or sharp objects in contact with the display
surface.
8.1.4 Store and operate the OLED display within the specified ratings. It is recommended to
store them as they have been contained in the inner container at the time of delivery from
us.
8.1.5 Avoid corner contact to display during assembly or installation to end products.
8.1.6 Installation Bending: The flex is generally designed to facilitate mounting to a PCB or
connector. It is not a dynamic flex. Therefore, bending should be limited to less than 3
times.
8.1.7 Bending Radius: The minimum bending radius is as shown in the product drawing or equal
to the thickness of the rear cap glass, whichever is smaller.
8.1.8 Wipe off saliva or water drops immediately. Contact with water over a long period of time
may cause damage of polarizer or color fading, while an active OLED display with water
condensation on its surface will cause corrosion of metal traces.
8.1.9 Cleaning:
8.1.9.1 Particle/ Foreign materials: Use non-abrasive cloth (Recommended Smartat
Cleanroom Wipes WIP-1009 D Series) to gently wipe over the surface of the
display in one direction.
8.1.9.2 Glue/ Adhesive Residue:
8.1.9.2.1 Method 1: Use non-abrasive cloth (Recommended Smartat
Cleanroom Wipes WIP-1009 D Series) and applicator (dipped in
IPA or ethanol if necessary) to gently wipe over the surface of the
display in one direction.
8.1.9.2.2 Method 2: Use the finger cot to gently clean the stain on by
rubbing it on the polarizer in one direction.
Product Specification (80)
Product Specification for HX2XX Full Moon OLED Module, 96X64, SSD0323,
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :23/(24)
Product Specification (80)
8.2 ESD
8.2.1 Electrostatic discharge (ESD): OLED modules are semiconductor devices. Take ESD
handling precautions by wearing a ground strap and avoid contacting electrical
connections.
Proprietary data, company confidential. All rights reserved. Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten.
Without red "doc released" stamp for information only. / Nur zur Information ohne roten "DOC RELEASED" Stempel.
Seite/ Page :24/(24)
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.