Osram 5W LED Full Glass GU10 Bulb - Twin Pack User guide

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources

Supplier's name or trade mark: LEDVANCE

Supplier's address: LEDVANCE GmbH, Parkring 33, Garching, Germany

Model identifier: AC32703

Type of light source:

Lighting technology used: LED Non-directional or

directional:

Light source cap-type

(or other electric interface)
Mains or non-mains: MLS Connected light

Colour-tuneable light source: No Envelope: ­High luminance light source: No
Anti-glare shield: No Dimmable: No

Parameter Value Parameter Value

Energy consumption in on­mode (kWh/1000 h), rounded
up to the nearest integer

Useful luminous flux (ɸuse),
indicating if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)

On-mode power (Pon),
expressed in W

Networked standby power (P
for CLS, expressed in W and
rounded to the second decimal

Outer
dimensions
without

Height 52
Width 50
Depth 50

net

)

GU10

source (CLS):

Product parameters

General product parameters:

5 Energy efficiency

class

350 in Narrow

cone (90°)

4,3 Standby power (Psb),

- Colour rendering

Correlated colour
temperature,
rounded to the
nearest 100 K,
or the range of
correlated colour
temperatures,
rounded to the
nearest 100 K, that
can be set

expressed in W
and rounded to the
second decimal

index, rounded to
the nearest integer,
or the range of CRI­values that can be
set

Spectral power
distribution in the

DLS

No

F

2 700

0,00

80

See image

in last page

Page 1 / 3

separate
control gear,

range 250 nm to 800

nm, at full-load
lighting
control parts
and non­lighting
control parts,
if any
(millimetre)

Claim of equivalent power

(a)

Yes If yes, equivalent

50

power (W)
Chromaticity

0,458

coordinates (x and y)

Parameters for directional light sources:

Peak luminous intensity (cd) 600 Beam angle in

36
degrees, or the
range of beam
angles that can be
set

Parameters for LED and OLED light sources:

R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,70

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1) 0,00 Colour consistency

6

in McAdam ellipses

Claims that an LED light
source replaces a fluorescent
light source without integrated

(b)

-

If yes then

­replacement claim
(W)

ballast of a particular wattage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect

0,4

metric (SVM)

(a)

'-' : not applicable;

(b)

'-' : not applicable;

Page 2 / 3

Page 3 / 3