Osram 5W LED Classic BC Candle Bulbs - Twin Pack User guide

Product Information Sheet

COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light
sources

Supplier's name or trade mark: LEDVANCE

Supplier's address: LEDVANCE GmbH, Parkring 33, Garching, Germany

Model identifier: AC32296

Type of light source:

Lighting technology used: LED Non-directional or

directional:

Light source cap-type

(or other electric interface)
Mains or non-mains: MLS Connected light

Colour-tuneable light source: No Envelope: ­High luminance light source: No
Anti-glare shield: No Dimmable: Yes

Parameter Value Parameter Value

General product parameters:

Energy consumption in on­mode (kWh/1000 h), rounded
up to the nearest integer

Useful luminous flux (ɸuse),
indicating if it refers to the flux
in a sphere (360º), in a wide
cone (120º) or in a narrow cone
(90º)

On-mode power (Pon),
expressed in W

Networked standby power (P
for CLS, expressed in W and
rounded to the second decimal

Outer
dimensions
without

Height 94
Width 35
Depth 35

net

)

B22d

source (CLS):

Product parameters

5 Energy efficiency

class

470 in

Sphere (360°)

4,8 Standby power (Psb),

- Colour rendering

Correlated colour
temperature,
rounded to the
nearest 100 K,
or the range of
correlated colour
temperatures,
rounded to the
nearest 100 K, that
can be set

expressed in W
and rounded to the
second decimal

index, rounded to
the nearest integer,
or the range of CRI­values that can be
set

Spectral power
distribution in the

NDLS

No

F

2 700

0,00

80

See image

in last page

Page 1 / 3

separate
control gear,

range 250 nm to 800

nm, at full-load
lighting
control parts
and non­lighting
control parts,
if any
(millimetre)

Claim of equivalent power

(a)

Yes If yes, equivalent

40

power (W)
Chromaticity

0,458

coordinates (x and y)

Parameters for LED and OLED light sources:

R9 colour rendering index value 0 Survival factor 0,90
the lumen maintenance factor 0,70

Parameters for LED and OLED mains light sources:

displacement factor (cos φ1) 0,00 Colour consistency

6

in McAdam ellipses
Claims that an LED light

source replaces a fluorescent
light source without integrated

(b)

-

If yes then

­replacement claim
(W)

ballast of a particular wattage.
Flicker metric (Pst LM) 1,0 Stroboscopic effect

0,4

metric (SVM)

(a)

'-' : not applicable;

(b)

'-' : not applicable;

Page 2 / 3

Page 3 / 3