OSP Designs BRAMLEY BRM92 Operating Instructions Manual

BRM92

BRAMLEY HALL STORAGE CABINET

OPERATING INSTRUCTIONS

WARNING

1. Do not use this product unless all screws and bolts are securely
tightened.

2. Check that all screws and bolts are tight every three months or as
needed.

3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.

4. Do not use this product as a stepladder.

5. Use this product for its intended purpose only.

6. Intended for residential use only.

OSP DESIGNS LIMITED WARRANTY

OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects and damage
from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP Designs is not covered.
The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.

To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components

still in warranty will be paid by Office Star Products.

It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.

BRM92

BRM92

BRAMLEY HALL STORAGE CABINET

IMPORTANT NOTE:

1. Use hand tools only for assembly as power tools may cause damage.

2. Carefully remove any staples used for packaging.

3. Phillips Screwdriver also needed for assembly (not provided)

STEP 1

ASSEMBLY INSTRUCTIONS

PART (CABINET) QTY

1. Cabinet .....................1

2. Shelf .......................1

3. Shelf Pin ....................4

1

BRAMLEY HALL STORAGE CABINET

ANTI-TIP KIT INSTALLATION INSTRUCTIONS

STEP 2

3

2

Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.

STEP 1 Insert four Shelf Pins (3) into cabinet at desired height.
STEP 2 Carefully place Shelf (2) onto Shelf Pins (3). Adjust levelers to level the cabinet.

STEP 1 Attach one Bracket to rear of cabinet using one Short Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS

SCREWDRIVER (not provided). Drill a ¼” pilot hole into the wall and tap in Anchor, secure remaining Bracket to wall using one Long Screw. FULLY TIGHTEN
LONG SCREW USING PHILLIPS SCREWDRIVER (not provided). Move cabinet into desired position and align wall Bracket and cabinet Bracket. Thread

Safety Strap through wall Bracket and cabinet Bracket and tighten Safety Strap until snug.

© Office Star Products April 2015