OSP ASCEND II ACT3020 User Manual

Page 1
ASCEND ll
ACT3020
ACTIVE HEIGHT-ADJUSTABLE SEAT
WARRANTY & WARNING
FEATURES
• OUTTASIGHT SEAT HEIGHT ADJUSTMENT
See page 4 for operating instructions.
NOTE: It is normal for chair to slightly lower under body weight.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every three months or as needed.
4. Move & carry chair as instructed.
5. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
OSP FURNITURE LIMITED PRODUCT WARRANTY
ASCEND II
Active seating and tables are warranted from the date of purchase as follows:
• 3 Years against failure due to materials and workmanship
state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
Page 2
ASCEND ll
ACT3020
ACTIVE HEIGHT-ADJUSTABLE SEAT
ASSEMBLY INSTRUCTIONS
PARTS LIST
(1) Seat (1Piece)
(5) Screw (6Pieces)
STEP 1 STEP 2
Remove hardware from Base Cover (3).
3
(2) Pneumatic Cylinder (1Piece) (4) Base (1Piece)(3) Bace Cover (1Piece)
3
2
NOTE: Remove black & white plastic protective caps from Pneumatic Cylinder (2).
STEP 3 STEP 4
Gently pull fabric toward Base Cover (3).
1
2
1
2
3
© Office Star Products January 2019
Page 3
ASCEND ll
ACT3020
ACTIVE HEIGHT-ADJUSTABLE SEAT
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
Turn upside down. Place fabric over edge of Base Cover (3).
1
3
NOTE: Do not allow fabric to contact upper (silver) portion of Pneumatic Cylinder (2).
STEP 7
Secure Base (4) to Base Cover (3) with Screws (5). FULLY TIGHTEN ALL SCREWS.
4
3
5
4
Page 4
ASCEND ll
ACTIVE HEIGHT-ADJUSTABLE SEAT
OPERATING INSTRUCTIONS
OUTTASIGHT easy-adjust mechanism
• Adjusts from any position
• OUTTASIGHT for clean, contemparary appearance
ACT3020
Page 5
ASCEND ll
ACT3020
ACTIVE HEIGHT-ADJUSTABLE SEAT
OPERATING INSTRUCTIONS
DO NOT REST FEET ON BASE. USE A THREE-POINT SITTING
POSITION WITH TWO FEET ON FLOOR. TIGHTEN CORE MUSCLES.
ALWAYS CARRY STOOL WITH TWO HANDS.
Loading...