Ositech Titan III Quick Start Manual

Ositech Titan III Wireless Cellular Gateway Introduction
For US models only

Dear Customer,

Thank you for choosing TITAN III Wireless Cellular Gateway. It has been designed
to provide you easy to use and reliable wireless connectivity for data
communications.

Before your Gateway can be configured for use with the LIFENET

®

System, you must

associate an active cellular data plan with each Gateway.

If you have purchased the data plan from Physio-Control, your Gateway will be
shipped activated and your Physio-Control Implementation Project Manager will
contact you to complete the configuration and registration of your Gateway with the
LIFENET System.

If you will be using your own data plan, please follow the instructions below to
complete the activation of your Gateway on the cellular network.

The following information will be required to activate the Gateway with your cellular
Carrier:

For activation on CDMA networks such as Verizon:

1. Find the Mobile Equipment Identifier (MEID) for your cellular Gateway. For

your convenience, this can be found on the peelable portion of the box label,
as well as on the label applied to the device. This MEID # is made up of 14
hexadecimal digits.

2. Contact your local Carrier Rep/Store with the following information:

o Gateway MEID # to assign the new phone number
o Manufacturer: Ositech
o Device Name: Titan III Wireless SD Gateway 3G

3. Your Gateway will require certain account features activated to function

properly. Please request the Carrier representative for the following features:

o Telemetry/M2M/Machine to Machine line
o Activated on at least 2-3MB data plan
o Voice restriction
o No static IP

723000-0F5-NA Rev. B

For activation on GSM networks such as AT&T or others:

1. Find the International Mobile Equipment Identifier (IMEI) for your cellular

Gateway. For your convenience, this can be found on the peelable portion of
the box label, as well as on the label applied to the device. The IMEI # is made
up of 15 decimal digits.

2. Contact your local AT&T Rep/Store with the following information:

o Gateway IMEI # to assign the new phone number.
o Manufacturer: Ositech
o Model Number: T3G15301

3. Your SIM card will require certain account features activated for your Gateway

to function properly. Please request the Carrier representative for the
following features:

o Telemetry/M2M/Machine to Machine line
o Activated on at least 2-3MB data plan
o Voice restriction
o No static IP
o Provisioned on APN isp.cingular (For AT&T Network only)

4. To install the SIM card in your cellular Gateway, please refer to the User

Manual.

Once you have successfully completed the activation with your cellular Carrier,
contact your LIFENET System implementation Specialist to complete the
configuration and registration of your Gateway with the LIFENET System.

If there are any questions or concerns with the process of activating your
Gateway(s) with your cellular Carrier, please contact LIFENET System support team
at 1-800-732-3081.

723000-0F5-NA Rev. B