
INSTRUCTIONS FOR MAX-BGX-1 RING REMOTE NEEDLE VERSION ENGINES
It is of vital importance, before attempting to operate
your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' leaflet enclosed. Also, please
study the entire contents of the instruction manual
enclosed, so as to familiarize yourself with the controls and other features of the engine.
This 'RN' version of the MAX-BGX-1 RING is fitted, as standard,
with a 'remote' needle-valve, mounted at the back of the engine,
safely distanced from the propeller. This device was origonated
by OS several years before being adopted by a number of other
manufacturers.
Silicone Tube
Remote Needle
BEFORE INSTALLING THE ENGINE
Fit the remote needle to the attachment bracket as shown in
•
the photo.
When beam-mounting the engine in the model, bolt the engine
•
to the bearers along with the attachment bracket. Please refer
to the INSTALLATION section of the engine instructions when
installing the engine.
Connect the needle-valve to carburettor jet nozzle with silicone
•
tubing supplied. In the event of the tubing becoming damaged,
it should be replaced with 78mm length of 5mm ODX2mm ID
silicone tubing.
Description
Crankcase
Crankshaft
Cylinder Liner
Piston
Piston Ring
Cylinder Head
Connecting Rod
Piston Pin
Piston Pin Retainer(2pcs.)
Cover Plate
Drive Hub
Woodruff Key
Propeller Lock Nut Set
Screw Set
Gasket Set
Code No.
29301000
29302000
29303100
29303200
29303400
29304000
29305000
29306000
29317000
29307000
29308000
29208200
29310100
29313000
29314000
PARTS LIST
Thrust Washer
Crankshaft Ball Bearing (Front)
Crankshaft Ball Bearing (Rear)
Remote Needle Valve Bracket(BGX-1)
Remote Needle Valve Assembly
Ratchet Spring
Plug Screw
Carburettor Complete(Type 8AA-RN)
Glow Plug No.8
E-5010 Silencer Assembly
Backplate Mount
Beam Mount
Description
Needle
"O" Ring
Set-screw
Fuel Outlet
Remote Needle Valve Bracket
Backplate Mount
Code No.
29320000
46231000
29330000
71704230
28282000
28281970
24981837
26381501
46181950
26711305
22881950
29383010
71608001
29025000
71919000
Description
Carburettor Body
Carburettor Rotor
Venturi Insert
Rotor Spring
Rotor Guide Screw
Mixture Control Screw Assembly
The specifications are subject to alteration for improvement without notice.
C
Copyright 1998 by O.S. Engine Mfg. Co., Ltd. All rights reserved. Printed in Japan.
PARTS LIST(CARBURETTOR)
Code No.
29381100
28281200
28281210
28281500
28281600
Throttle Lever Assembly
Fuel Inlet
Carburettor Rubber Gasket
Carburettor Fixing Screw
Description
"O" Ring
29381300
Code No.
27881820
28281400
22681953
29315000
24925202
6-15 3-chome Imagawa Higashisumiyoshi-ku
Osaka 546-0003, Japan.
TEL. 06-6702-0225
FAX. 06-6704-2722