OSEE WVT-501 User Manual
WVT-501
Wireless Video
Transmitter and Receiver
User Manual
Product Information
Model:
WVT-501
Version:
V010000
Release Date:
September 26th, 2017
Company
OSEE TECHNOLOGY CO., LTD.
Contact Information
OSEE TECHNOLOGY CO., LTD.
Post Code:
100094
Tel:
(+86) 010-62434168
Fax:
(+86) 010-62434169
Web:
http://www.osee-dig.com.cn/
About this manual
Important
The following symbols are used in this manual:
y
The further information or know-how for described subject
s above which
helps user to understand them better.
y
The safety matters or operations that user must pay attention to when
using this product.
y
Any Changes or modifications not expressly approved by the party
r
esponsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
har
mful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Radiation Exposure Statem
ent:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with
any other antenna or transmitter.
This equipment should be installed and oper
ated with minimum distance
20cm between the radiator &you body.
Note: This equipment has been tested and found to comply with the limits
device, pursuant to part 15 of the FCC Rules.
limits are designed to provide reasonable
protection against harmful
sidential installation. This equipm ent generates
can radiate radio frequency energy and, if not installed and used in accordance
the instructions, may cause harmful interference to radio communications.
that interference will not occur in a particular
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user
try to correct the interference by one or
more of the following
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
connected.
—Consult the dealer or an experienced
radio/TV technician for help.
Contents
The user manual applies to the following device types
:
y WVT-501
The images and descriptions of WVT-501 are adopted as examples in the
following document.
Before reading the manual, please confirm the device type.
for a Class B digital
These
interference in a re
uses and
with
However, there is
no guarantee
is encouraged to
measures:
the receiver is
installation. If this equipment does
Overview
1
Chapter 1 Overview
The OSEE WVT-501 wireless video transmitter and receiver provide a simple signal
connection solution for shooting on site, it can realize up to 1000m wireless video
transmission of 1080 video signal with no compression and no delay in optimal line-of
sight situations. The WVT-501 transmitter supports a SDI input or a HDMI input, and
the SDI input with loop out, besides, the WVT-501 receiver supports two SDI outputs,
a HDMI output.
The OSEE WVT-501 has compact structure, and provides flexible power supply and
installation modes, it is convenient for supervision on site and signal transmission in
film & TV production and broadcasting industries.
Figure 1-1 WVT-501 Transmitter and Receiver
Features
Maximum transmission distance 1000m
Highest resolution 1920*1080, no delay and no compression
Support HD-SDI and HDMI Input/Output
Overview
2
User configurable frequency bands
Support SDI/HDMI interleaving output
With internal battery to achieve power switch for uninterrupted work
Provide battery plate as standard configuration
CNC aluminum, laser lithography, ruggedized
Support TALLY input/output
Safety
3
Warnings:
Read, keep and follow all of these instructions for your safety. Heed all warnings.
Device
y Install in accordance with the manufacturer's instructions.
y Do not beat with a hard object or scratch the unit.
y Refer all servicing to qualified service personnel. Servicing is required if any of
the following occurs:
The unit has been exposed to rain or moisture.
Liquid had been spilled or objects have fallen onto the unit.
The unit has been damaged in any way, such as when the power-supply
cord or plug is damaged.
The unit does not operate normally, or has been dropped.
y Clean only with dry cloth.
y Do not block any ventilation openings. Leave enough space around the unit
for ventilation.
y Do not use this unit near water.
y A nameplate indicating operating voltage, etc., is located on the rear panel.
y The socket-outlet shall be installed near the equipment and shall be easily
accessible.
y To reduce the risk of fire or electric shock, do not expose the unit to rain or
moisture.
y To avoid electrical shock, do not open the cabinet. Refer all servicing to
qualified service personnel.
y If the product needs replacement parts, make sure that the service person use
replacement parts specified by the manufacture, or those with the same
characteristics and performance as the original parts. Use of unauthorized
parts can result in fire, electric shock and/or other damage.
y The panel used in this produce is made of glass. Therefore, it can break when
it is dropped or applied with impact. Be careful not to be injured by broken
glass pieces.
y Specifications are subject to change without notice.
Loading...