OSEE RMS5032 User Manual

RMS5032

USER MANUAL

Product Information

Model:

RMS5032 LCD MONITOR

Version:

V010002

Release Date:

March 12th, 2015

Company

OSEE TECHNOLOGY CO., LTD.

Contact Information

Address:

No.22 Building, No.68 zone, Beiqing Road, Haidian District,
Beijing, China

Post Code:

100094

Tel:

([phone]

Fax:

([phone]

Web:

http://www.osee-dig.com/

E-mail:

[e-mail]

About The USER MANUAL

The user manual applies to the following device types:

 RMS5032-HSC
 RMS5032-SC

The images of RMS5032-HSC are adopted in the following descriptions. Any of the
different specifications between the device types are elaborated. Before reading the manual,
please confirm the device type.

Note: The specs are subject to change without prior notice!

Contents

Chapter 1 Product Overview ................................................................................... 1



Chapter 2 Safety Precaution for Use ...................................................................... 2



Chapter 3 Unpacking and Installation .................................................................... 4



Chapter 4 Using the RMS5032 ................................................................................ 5



4.1 Status Display of the Screen .......................................................................................................... 5

4.2 Front Panel Controls ...................................................................................................................... 6

4.3 Quick Button Descriptions ............................................................................................................ 8

4.3.1 ENTER BUTTON ................................................................................................................. 8

4.3.2 USER BUTTON ................................................................................................................... 8

4.3.3 MENU BUTTON .................................................................................................................. 9

4.4 Rear Panel ..................................................................................................................................... 10

Chapter 5 Main Menu Structure ............................................................................ 12



5.1 STATUS Sub-menu .................................................................................................................. 12

5.2 VIDEO Sub-menu .................................................................................................................... 12

5.3 AUDIO Sub-menu .................................................................................................................... 13

5.4 MARKER Sub-menu ............................................................................................................... 14

5.5 OSD Sub-menu ......................................................................................................................... 15

5.6 USER CONTROL Sub-menu .................................................................................................. 18

5.7 USER CONFIG Sub-menu ...................................................................................................... 19

Chapter 6 Technical Specifications ...................................................................... 20



Chapter 7 Warranty for LCD Monitor ........................................................................... 24

User Manual for RM7023 - 1 -

Chapter 1 Product Overview

The RMS5032 is a 2U high rack mountable LCD monitor that offers video and audio monitoring with
high resolution of 800x480. The unit is equipped with full digital processing technology, and its screens
feature anti-glare. The model accepts HD-SDI, SD-SDI and analog composite signal. A high display
quality of all video signals can be ensured by full digital processing. The precise scaling chip as well as
color correction is a guarantee for high quality display image.
The monitor comes with many in monitor display features including WFM, Dynamic IMD, analog audio
input as well as RS485.

Features：

 Auto- Sensing for HD/SD-SDI, Composite signal
 Embedded Audio Support，4 or 8 Channels Audio Meter (VU & PPM)
 H/V Delay, Under Scan, Safe & Area Marker, Aspect Ratio, Blue Only, Tally
 Audio Monitoring via Headphone Jack.
 Support COLOR temperature correction.
 Support Dynamic IMD, and TSL and IMAGE VIDEO protocols. RS485 connector.
 Waveform and Vector scope display for SDI signal
 Support OSD TALLY (SPLIT TALLY); Support LED TALLY.
 Support SD ASPECT. When the input is CVBS or SD-SDI, it supports 16:9 and 4:3 display.
 Support HD ZOOM. When the input is HD-SDI, it adds the “HD zoom” function to be

changed from 16:9 and 4:3.

 An interface is displayed when USER menu is under operation.
 Support FPGA and MCU upgrade via RS485.

Product Number Description

RMS5032-HSC Three monitors: each monitor includes one video input and one video output

(support HD-SDI / SD-SDI / CVBS), two external audio input connectors, two
external audio output connectors. One RS485 input (RJ45), One RS485 output
(RJ45).

RMS5032-SC Three monitors: each monitor includes one video input and one video output

(support SD-SDI / CVBS), two external audio input connectors, two external
audio output connectors. One RS485 input (RJ45), One RS485 output (RJ45).

RMS5032 LCD MONITOR User Manual

—2—

Chapter 2 Safety Precaution for Use

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.

User Manual for RM7023 - 3 -

Read and keep these instructions. Heed all warnings. Follow all instructions.

About the Position

1. Do not block any ventilation openings.

2. Do not use this unit near water.

3. Do not expose the unit to rain or moisture.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that product heat.

5. A nameplate indicating operating voltage, etc., is located on the rear panel. Install only in

accordance with the instructions in the section entitled, “Unpacking and Installation” on page 3.

6. The socket-outlet shall be installed near the equipment and shall be easily accessible.

About the Power-supply Cord

7. Do not defeat the safety purpose of the polarized or grounding-type plug.

8. Do not damag e the power cord, place the heavy objects on the power cord, stretch the power

cord, or bend the power cord.

9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the unit.

10. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit

with a damaged power cord. It may cause fire or electric shock.

11. Unplug this apparatus during lighting storms or when unused for long periods of time.

12. Disconnect the power cord from the AC outlet by grasping the plug, not by pulling the cord.

13. Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by

qualified personnel before operating it any further.

Monitor

14. Do not beat with a hard object or scratch the LCD display.

15. Do not make the freeze picture displaying on the screen time too long, otherwise, it will leave

the afterimage on the screen.

16. Install in accordance with the manufacturer’s instructions

17. If the brightness is adjusted to the minimum, then it might be hard to see the display screen.

18. Refer all servicing to qualified service personnel. Servicing will be required under all of the

following conditions:

 The unit has been exposed to rain or moisture.
 Liquid had been spilled or objects have fallen onto the unit.
 The unit has been damaged in any way, such as when the power-supply cord or plug is

damaged.

 The unit does not operate normally.

19. Clean only with dry cloth.

20. Specifications are subject to change without notice.