OSEE RMD7023 User Manual

RMD7023

USER MANUAL

PRODUCT INFORMATION

MODEL: RMD7023 LCD MONITOR
Version: V030000
Release Date: 2010-2-26

COMPANY NAME

Beijing Osee Digital Technology Ltd.

CONTACT INFORMATION

Address: Room 702, Tower D, Jinyujiahua Building, No.9, 3rd Shangdi Street, Haidian
District, Beijing, China
Post code:100085
Tel: [phone]
Fax: [phone]
Http://www.osee-dig.com
E-mail:[e-mail]

About The USER MANUAL

The user manual applies to the following device types:

 RMD7023-HSC
 RMD7023-SC
 RMD7023-V

The images of RMD7023-HSC are adopted in the following descriptions. Any of the
different specifications between the device types are elaborated. Before reading the manual,
please confirm the device type.

Contents

Chapter 1 Product Overview .............................................................................................. 1

Chapter 2 Safety Precaution for Use .................................................................................. 2

Chapter 3 Unpacking and Installation ............................................................................... 3

Chapter 4 Using the RMD7023 ........................................................................................... 4

4.1 Status Display of the Screen .......................................................................................................... 4

4.2 Front Panel Controls ...................................................................................................................... 5

4.3 Quick Button Descriptions ............................................................................................................ 7

4.3.1 ENTER BUTTON ............................................................................................................ 7

4.3.2 USER1~ USER3 BUTTON .............................................................................................. 7

4.3.3 MENU BUTTON .............................................................................................................. 9

4.4 Rear Panel ....................................................................................................................................... 9

Chapter 5 Main Menu Structure ....................................................................................... 11

5.1 STATUS Sub-menu .................................................................................................................. 11

5.2 VIDEO Sub-menu .................................................................................................................... 12

5.3 AUDIO Sub-menu .................................................................................................................... 12

5.4 MARKER Sub-menu ............................................................................................................... 14

5.5 OSD Sub-menu ......................................................................................................................... 15

5.6 USER CONTROL Sub-menu .................................................................................................. 19

5.7 USER CONFIG Sub-menu ...................................................................................................... 20

Chapter 6 Technical Specifications .................................................................................. 20

Chapter 7 Warranty for LCD Monitor ............................................................................ 23

RMD7023 LCD MONITOR User Manual

—1—

Chapter 1 Product Overview

The 3U rack mounted RMD7023 represents ne w trend in LCD monitor for broadcast and professional
video applications. It has 800X480 high resolution, anti-glare TFT screens with full digital signal
processing. HD-SDI, SD-SDI and analog composite video standards are accepted of this model. All video
formats are scaled to fit on screen in the highest quality using full digital processing, precision scaling
and Gamma correction to produce the best images available.

The monitor comes with many in monitor display features including WFM, Vectorscope as well as
RS485.

Features：

 Auto- Sensing for HD/SD-SDI, Composite signal
 Embedded Audio Support，4 or 8 Channels Audio Meter (VU & PPM)
 H/V Delay, Under Scan, Safe&Area Marker, As pect Ratio, Blue Only , Tally
 1 Pair Audio Monitoring via Headphone Jack. Built-in speaker.
 Support COLOR temperature correction.
 Support Dynamic UMD, and TSL and IMAGE VIDEO protocols. RS485 connector.
 Waveform and Vectorscope display for SDI signal
 Support OSD TALLY (SPLIT TALLY); Support LED TALLY.
 Support SD ASPECT . When the input is CVBS or SD-SDI, it supports 16:9 and 4:3 display.
 An interface is displayed when USER menu is under operation.
 Support FPGA and MCU upgrade via RS485.

Product Number Description

RMD7023-HSC Two monitors: each monitor includes two video inputs (support HD-SDI /

SD-SDI / CVBS)，four external audio input connectors.
One RS485 input (RJ45), One RS485 output (RJ45).

RMD7023-SC Two monitors: each monitor includes two video inputs (support SD-SDI /

CVBS) ，four external audio input connectors.
One RS485 input (RJ45), One RS485 output (RJ45).

RMD7023-V Two monitors: each monitor includes two video inputs (support CVBS)， four

external audio input connectors.
One RS485 input (RJ45), One RS485 output (RJ45).

RMD7023 LCD MONITOR User Manual

—2—

Chapter 2 Safety Precaution for Use

Read and keep these instructions. Heed all warnings. Follow all instructions.

About the Position

1. Do not block any ventilation openings.

2. Do not use this unit near water.

3. Do not expose the unit to rain or moisture.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that product heat.

5. A nameplate indicating operating voltage, etc., is located on the rear panel. Install only in

accordance with the instructions in the section entitled, “Unpacking and Installation” on page 3.

6. The socket-outlet shall be installed near the equipment and shall be easily accessible.

About the Power-supply Cord

7. Do not defeat the safety purpose of the polarized or grounding-type plug.

8. Do not damage the power cord, place the heavy objects on the power cord, stretch the power

cord, or bend the power cord.

9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the unit.

10. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit

with a damaged power cord. It may cause fire or electric shock.

11. Unplug this apparatus during lighting storms or when unused for long periods of time.

12. Disconnect the power cord from the AC outlet by grasping the plug, not by pulling the cord.

13. Should any soli d object or liquid fall into the cabinet, unplug t he unit and have it checked by

qualified personnel before operating it any further.

Monitor

14. Do not beat with a hard object or scratch the LCD display.

15. Do not make the freeze picture displaying on the screen time too long, otherwise, it will leave

the afterimage on the screen.

16. Install in accordance with the manufacturer’s instructions

17. If the brightness is adjusted to the minimum, then it might be hard to see the display screen.

18. Refer all servicing to qualified service personnel. Servicing will be required under all of the

following conditions:

 The unit has been exposed to rain or moisture.
 Liquid had been spilled or objects have fallen onto the unit.
 The unit has been damaged in any way, such as when the power-supply cord or plug is

damaged.

 The unit does not operate normally.

19. Clean only with dry cloth.

20. Specifications are subject to change without notice.

RMD7023 LCD MONITOR User Manual

—3—

Chapter 3 Unpacking and Installation

1. Unpack the RMD7023 Monitor and inspect for any apparent physical damage that
may have occurred in transit. We recommend you reta in the shipping carton for future use.
If there be any damage, immediately contact OSEE DIGITAL TECHNOLOGY LTD at
[phone].

2. After inspection, install in your desired location of a standard EIA 19-inch equipment
rack. Adequate ventilation is required when installed to prevent possible damage to the
RMD7023 internal components.

3. Connect required cables for signal input and output. Please note that power must be
applied to the RMD7023 for all outputs to be activated. For BNC connections use 75Ω
rated connectors.

4. Connect A.C. Mains power using the included power cord. Please ensure an Earth
ground present to ensure proper operation of the unit. Fasten the power protect accessory.

5. As a final step turn on each screen of the RMD7023 by depressing the power switch
located on the front of the unit.

Supplied Accessories:

1.Monitor 1

2.12 V DC power supply 1

3.User Manual 1

4.Warranty Card 1

RMD7023 LCD MONITOR User Manual

—4—

Chapter 4 Using the RMD7023

4.1 Status Display of the Screen

1. LED Tally Light: This tri-color (red/green/amber) light is controlled through a DB9

connector on the rear panel. For more information about the DB9 connector, refer to
“Rear Panel” on Chapter 4.4.

2. Input Signal Format: It displays the input signal format and can be set in the MAIN

Menu.

3. Safe Areas: Multiple safe areas are configurable in the MAIN Menu.

4. Audio Meters: Levels for the audio. For RMD7023-SC and RMD7023-V, only two

meters on the left side.

5. UMD: The MAIN Menu provides settings to customize the UMD (In-Monitor Display)

text area to show a line of characters, numbers, and/or some symbols.

6. Speakers: Audio may be selected for monitoring through the left and right speakers.

7. Time Code: The de-embedded time code from the HD/SD-SDI source displays in the

top right corner.

8. Waveform and Vectorscope: The signal waveform and vectorscope are configurable

in the MAIN Menu.

 Referring to the circumstance of no sync ( power on):

1.

Will indicate on the top left hand of screen: IN A: NO SYNC

2. On the bottom of screen will UMD and METER be shown, but the display of

UMD and METER is subject to the current main menu setting. When in the main
menu UMD DISP is set to ON and, no video input, UMD will display; when it is

Audio Meters

UMD

Input Signal
format

Time Code

Safe Marker

Waveform or Vectorscope

Speakers

LED Tally Light

OSD Tally

RMD7023 LCD MONITOR User Manual

—5—

set OFF, UMD won’t be displayed. The same applies to the display of METER.

3. The main menu can still be displayed, but the value of parameter relating to image

is not adjustable; and the value of parameter relating to the display effect can be
adjustable.

4.2 Front Panel Controls

1: Power On/Off Switch

When the indicator in the power switch is in green, it indicates that power is on.
When the indicator is flashing, it indicates standby.

2: INA/B

Press to select one input signal from two input channels.

3: SCAN

Press to display the 100% image (UNDER SCAN) and 95% (NORMAL) image.

4/5/6: USER1~ USER3

“USER1~ USER3” serve as the quick-button; its function can be assigned in the main MENU.

（For more information, please refer to “Chapter 4.3.2”）

7: MENU

Press to display the main menu. （For more information, please refer to “Chapter 4.3.3” and Chapter5）

8/9: Two functions

 Press “MENU” button to choose the function you need.

 When the “MENU” is not in use, the button of 8/9 can achieve the following functions: