OSEE IRS3232 User Manual
IRS Router
User Manual
3
Product Information
Model:
IRS3232 Router
Version:
V010002
Release Date:
April 29th, 2015
Company
OSEE TECHNOLOGY CO., LTD.
Contact Information
Address:
No.22 Building, No.68 zone, Beiqing Road, Haidian District,
Beijing, China
Post Code:
100094
Tel:
(+86) 010-62434168
Fax:
(+86) 010-62434169
Web:
http://www.osee-dig.com/
E-mail:
sales@osee-dig.com
About this manual
Important
The following symbols are used in this manual:
The further information or know-how for described subjects above which
helps user to understand them better.
The safety matters or operations that user must pay attention to when
using this product.
Contents
The user manual applies to the following device types:
IRS3232
The images of IRS3232 are adopted in the following descriptions.
Any of the different specifications between the device types are elaborated.
Before reading the manual, please confirm the device type.
I
Contents
Contents .......................................................................................................... I
Chapter 1 Overview ....................................................................................... 1
Chapter 2 Safety ............................................................................................. 3
Chapter 3 Unpack and Installati on ............................................................... 7
Chapter 4 Device Features ............................................................................ 9
4.1
Outward Appearance .......................................................................... 9
4.1.1 Front Panel Features ...................................................................... 10
4.1.2 Rear Panel Features ....................................................................... 10
Chapter 5 Device Application ..................................................................... 15
5.1
Network .............................................................................................. 15
5.2
Operations ......................................................................................... 16
Chapter 6 Network Control .......................................................................... 17
6.1
Access the settings ........................................................................... 17
6.2
Network Control ................................................................................ 18
6.2.1 STATUS ......................................................................................... 18
6.2.2 REMOTER ...................................................................................... 22
6.3
Example ............................................................................................. 24
Chapter 7 Specifications ............................................................................. 27
Overview
1
Chapter 1 Overview
The IRS Series routers are designed for easy control by the IRS Series remote
control panels, the routers are a series of Matrix products developed by OSEE
with high intelligent and low cost, which applied to medium and small sized
broadcast system switching digital HD/SD signals. This series of products can
support up to 32 embedded digital HD/SD signals which is transmitted in
independent bus and meet the medium and small sized signal dispatching
system’s demands.
The IRS Series routers offer 32X32 type. The series products support network
control which is easily accessible from any computer equipped with an
Ethernet port, and the device configuration is performed using a simple
user-friendly web page. Advanced functionalities such as locks and protects
are fully supported. As the simple operation, the users can simply operate the
switchers without mistake.
The IRS Series products can be applied to the broadcast system on the carrier
signal scheduling, are suitable for broadcast room, master control room, studio,
and other areas of a variety of real-time applications, to switch the SDI input
signal to the output signal.
Figure 1-1 A Diagram of Remote Control Panel
Features
Support up to 32 digital signals output switching, including HD, SD and
3G signals.
Use Ethernet control and UDP protocol to achieve flexible and reliable
control process.
Support NETWORK protocol, which enables network control.
Support computer remote control, which is easy and convenient.
Dual redundant power supply and automatic balanced input cable
ensure high-reliability and high-stability.
Overview
2
Support power off memory, the output and the signal source will keep
the relationship after power off or power restarted.
Functionality
The buttons of the IRS series show the reality of the current work
status of each signal. It would monitor and text each channel of input
signal. The button is tri-color key. Normal signal lights GREEN while
the non-normal signal lights RED.
The IRS series support intelligent protection function in order to
avoiding "misuse". When the input signal is detected abnormal, the
switching operation for output would be invalid.
Support automatic switching function. It has a direct access to
BYPASS input signal. When the PGM main output signal is abnormal,
the output will automatically switch to the BYPASS signal.
Support network supervisory control, and use the network control page
to supervise and configurate the Remote Control Panel.
Support Ethernet control to the Remote Control Panel and the Router.
Support multiple control modes: native panel control, remote panel
control and remote computer control.
Support dropping hints function. When in a broadcast system, there
are several routers connecting with several remote control panels,
when the remote control panel hasn’t received the signal sending from
the router in 4 seconds, all lights of the remote control panel would be
flashing, and they will stop flashing when the signal recover.
Output protection: if the signal source is vacant, it will not permit to
switch to this channel in case of improper operation.
Flow Chart
Figure 1-2 The Flow Chart of Data Processing for Router
Safety
3
Chapter 2 Safety
FCC Caution
:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Safety
4
Warnings:
Read, keep and follow all of these instructions for your safety. Heed all
warnings.
Device
Do not beat with a hard object or scratch the device.
Install in accordance with the manufacturer's instructions.
Refer all servicing to qualified service personnel. Servicing will be
required under all of the following conditions:
The unit has been exposed to rain or moisture.
Liquid had been spilled or objects have fallen onto the unit.
The unit has been damaged in any way, such as when the
power-supply cord or plug is damaged.
The unit does not operate normally.
Clean only with dry cloth.
Specifications are subject to change without notice.
Position
Do not block any ventilation openings.
Do not use this unit near water.
Do not expose the unit to rain or moisture.
Do not use this unit near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that product
heat.
A nameplate indicating operating voltage, etc., is located on the rear
panel.
Safety
5
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Power Supply Cord
Do not defeat the safety purpose of the polarized or grounding-type
plug.
Do not damage the power cord, place the heavy objects on the power
cord, stretch the power cord, or bend the power cord.
Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
unit.
If the power cord is damaged, turn off the power immediately. It is
dangerous to use the unit with a damaged power cord. It may cause
fire or electric shock.
Unplug this unit during lighting storms or when unused for long periods
of time.
Disconnect the power cord from the AC outlet by grasping the plug, not
by pulling the cord.
Should any solid object or liquid fall into the cabinet, unplug the unit
and have it checked by qualified personnel before operating it any
further.
6
Loading...