Osaki Power Tools CS36Li Owner's Manual
QUALITY GUARANTEE & WARRANTY
OSAKI POWER TOOLS carry one years manufacturers warranty.
OSAKI POWER TOOLS are designed & produced
to the highest standards & specifications
OSAKI POWER TOOLS are fully guaranteed against
faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
Osaki Power Tools are designed for DIY and hobby use only.
They are not covered by an industrial warranty. Industrial use will invalidate this guarantee.
OPERATOR’S MANUAL
3.6V CORDLESS SCREWDRIVER
ORDER CODE
OSA-279-7100K
CS36Li
• Suitable for DIY,
home improvement
and workshop use.
• Compact design allows
you to get into tight spaces.
• Powered by a high capacity lithium-ion
battery.
• ONLY weighs 350g
• 7 torque settings
• Forward/reverse & spindle lock
• Integral 3 LED worklight
• Ergonomic bi-material grip for comfort
with wrist strap
• 3 colour LED battery condition lights
© The Kennedy Group Ltd. 09/11
EC DECLARATION OF CONFORMITY
Osaki Power Tools continually strives to improve its products. Specifications may change without prior notice.
OSAKI TOOLS Official Agents - JAPAN: MIKI TOOL TRADING CO. MIKI CITY, JAPAN.
EUROPE, MIDDLE EAST, AMERICA & AFRICA: KENNEDY TOOLS, WIGSTON, ENGLAND.
DECLARATION OF CONFORMITY
We hereby certify that OSAKI CS36Li Screwdriver and Charger
complies with all the relevant provisions of the following directives:
Electromagnetic Compatibility 2004/108/EC
(Charger)
, Low Voltage 2006/95/EC
(Charger)
Electromagnetic Compatibility 2004/108/EC
(Screwdriver)
, Machinery 2006/42/EC
(Screwdriver)
.
Official Agent
KENNEDY TOOLS
Wigston, Leicester, England.
Signed:
Date: 1st September 2011 Name: Martin Cooke Position: Director, The Kennedy Group Ltd.
Osaki, Osaki Xtra-plus and the round Mitsudomoe logo are trade marks of Osaki Tools.
OSA-279-7100K_Instructions.qxd 22/08/2011 07:53 Page 1
SYMBOLS USED WITH THIS PRODUCT
SAFETY INSTRUCTIONS
72
Man, Earth and the Universe
are forces that create an
immovable centre of balance . ..
the
balance of power
“
”
Read operator’s
manual
Double
insulated
Centre
positive
Recycle
See page 5
Short- circuit proof
safety transformer
For indoor use
only
WEEE
See page 5
European
Conformity
WarningRoHS
See page 5
Plug type
OTHER OSAKI
SPECIFIC OPERATING HAZARDS
Always use the corresponding charger that
comes with the Screwdriver.
Never operate the Screwdriver whilst charging.
Never charge the Screwdriver in a damp or wet
environment. The charger is for indoor use only.
Never charge the Screwdriver in an air
temperature below 40°F (4.5°C) or above 105°F
(40.5°C). This could cause serious damage to
the battery.
Never cover the charger, use it in direct sunlight
or near heat sources.
GENERAL OPERATING HAZARDS
Always stay alert and watch what you are doing.
Always ensure the tool is kept in a good working
condition. Do not use the tool if any parts are
missing or damaged. Ensure servicing and repair
is undertaken by a suitably qualified person.
Never modify the tool or accessories and only
use it for the task for which it has been
designed.
Never force or apply excessive pressure, let the
tool do the work for you.
Never operate the tool when tired or under the
influence of alcohol or prescription/nonprescription drugs.
Never touch parts of the tool or accessories
when they are moving.
PERSONAL PROTECTION
Always wear approved eye protection when using
the screwdriver.
WORKPLACE HAZARDS
Always keep your work area clean and well lit.
Always maintain a balanced body position and
secure footing.
Always use a vice or clamping device to hold
small work pieces firmly in place.
Always keep children away from the work area
and where tools are stored.
Always be aware of hidden cables and pipes.
Always avoid body contact with earthed or
grounded surfaces such as pipes, radiators and
refrigerators.
Never make contact with electric power sources
as this tool is not insulated.
Never work in a combustible atmosphere.
Osaki Power Tools are committed to the Production of a range of Quality Power Tools
that are designed for high performance and long service life. By following the recommended
safety and maintenance procedures they will last for many years.
OSA-279-7100K_Instructions.qxd 22/08/2011 07:53 Page 2
Loading...