Page 1
Page 2
ORU - Ford Super Duty & Excursion Sub-Frame & Skid Plate Kit
Bill of Materials, P/N 79004
Part # Qty. Description
79004-1
79004-2
79004-3
79004-4
79004-5
79004-HP
1
1
2
1
2
1
driver side frame bar
passenger side frame bar
cross bar
skid plate
side plate
hardware pack containing:
1
(8)
(4)
(10)
(4)
(8)
” x 1-1/2” bolts with double flat washers and lock nuts.
/2
1
” x 4-1/2” bolts with double flat washers and lock nuts.
/2
3
” x 1” bolts with double flat washers and lock nuts.
/8
1
” ID x 3” steel sleeves.
/2
urethane bushings.
INSTALLATION NOTES:
• Inspect the contents of the kit and read the entire
instructions before proceeding.
• We recommend this installation be performed by a
qualified technician.
5
• Torque all hardware to factory specifications.
• We recommend using red Loctite on all bolts.
WARRANTY POLICY
ORU (Off Road Unlimited), extends a lifetime warranty on their products to the original purchaser. The warranty covers defects in material and
workmanship. This warranty does not apply to wear items such as brakes, steering components, u-joints, etc., or to products sold by, but not
manufactured by ORU. Application of this warranty is subject to inspection of the product by ORU and at their sole discretion. ORU is not
responsible for shipping charges incurred to submit product for inspection, or its return if the warranty is declined. This warranty does not cover
parts that have been modified, applied outside of the intended application, or subjected to abuse. This warranty applies solely to the ORU product
and does not extend to any incidental damage(s) or incurred cost(s). No other warranties/guarantees are expressed or implied. All warranty claims
must be accompanied by the original receipt, or reasonable facsimile. To apply for warranty consideration, contact the ORU customer service
department at 818-563-1208.
/16" nuts
3
7
/16" nuts
1
9
/16" nuts
5
Grade 8 nut torque specifications
STANDARD METRIC
20 ft. lbs. M6
/8" nuts
/2" nuts
/8" nuts
35 ft. lbs.
60 ft. lbs.
90 ft. lbs.
160 ft. lbs.
175 ft. lbs.
M8
M10
M12
M14
M16
9 ft. lbs.
23 ft. lbs.
45 ft. lbs.
75 ft. lbs.
120 ft. lbs.
165 ft. lbs.
offroadunlimited.com
page 1
Page 3
ORU - Ford Super Duty & Excursion Sub-Frame & Skid Plate Kit
1) Remove factory skid plate (if equipped).
2) Starting with drivers side, attach side frame bar front mounting hole to existing hole in bottom
flat edge of frame with 1/2” bolt (see photo #1). Temporarily snug bolt. Do not tighten at this time.
Repeat on passenger side.
3) Install polyurethane bushings and steel sleeves in cross bars (See photo #2). Install the cross bars
using 1/2” bolts (See photo #3). Do not tighten. Using the side bars as a template, mark and drill the
rear 1/2” mounting holes (See photo #4) CAUTION; make sure there are no electrical or fuel lines
that will come in contact with the drill. Temporarily install the rear 1/2 ” bolt and mark the remaining
hole locations.
4) Remove the assembly and drill the remaining 1/2” mounting holes. Re-install the assembly and
tighten bolts.
5) Install skid and side plates with 3/8” bolts (see photo #5).
photo 1
photo 2
photo 3 photo 4
offroadunlimited.com
page 2
photo 5
Loading...