Ortovox Free Rider 16 User Manual
Removable Protector
Open the velcro pocket at
the backpanel and take out
the protector.
Seperate Use:
You can wear the
protector seperately
under your clothes.
For full protection without
the backpack, attach the
extra straps with the
plastic eyelets (K) at the
small loops (L) on the
protector.
You can adjust the straps
to your shoulder and hip
size for a firm fit (M).
For seperate use, it is only allowed to use the
protector under your outerwear.
K
L
M
M
BACKPACKS
FREE RIDER 16
FREE RIDER 18
Back length:
FR 16: 48cm
FR 18: 52cm
Helmet Fixation
Small loop
- regular helmet fixation
Big loop
- to attach ice axe or poles
- for helmet fixation, when
carrying snowboards or full
face helmets
Additional straps
stored in mesh pocket
2x Ice Axe loop
1x helmet
net
1x protector
harness
(see back side)
Backpanel Access
to main compartment
to drinking bladder
to protector
Drinking System
You can fit any
standard drinking
bladder. The neopren
shoulder strap
insulates the tube
against freezing.
D-fixation
Connect the upper
straps with the
buckle to a big loop,
same as for
snowboard fixation.
Like this the skis
can be positioned
centered.
At bottom use one
loop.
Snowboard
Connect the upper
straps with the
buckle and the
lower straps with
the hook to a big
loop. Hook the
bottom ALU Hook
in the loop end of
the opposite
hypalon strap.
Ski Fixation
Use the
upper straps inside
the zipper pocket
and the
2 lower straps with
the metal hook for
fixing your gear as
shown below.
X-fixation
Put the skis in the bottom straps with the
ALU Hook. Attach each ski with a loop from
the zipper compartment and tension the
loops. This new carry-way is perfect for a
wide range of terrain and often better than
D- or A-fix. Weight is balanced, feet and head
are free.
Loading...