Ortek Technology WKP250 User Manual

Wireless Mobile Mini Keypad

User’s Manual

Version: 1.0 2003/05
ID NO: PAK-131W2501-00

0

Introduction

This manual is designed to assist you in installing and
using the Keypad. Information in this document has been
carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information
in this document is subject to change without notice.

System Requirements

®

 Microsoft

compatible

 One USB v. 1.1 or 2.0 Compliant Port

Installation

Connection with Windows

1. Plug the USB receiver connector to your PC.

2. The Add New Hardware W izard appears.

3. Click Next. The locate driver screen appears.

4. Select “Search for the best driver for your device.

(Recommended),” and then click Next. The wizard searches
for the appropriate device driver.

5. Click Finish to complete the driver installation.

Windows® 98/Me/2000/XP and MAC OS

®

98/Me

You are now ready to begin using your wireless keypad.

1

Windows 2000/XP Operating System

1. Plug the USB receiver connector to your PC.

2. The Found New Hardware Wizard appears and the OS will
install the driver automatically. No other steps are necessary.

You are now ready to begin using your wireless keypad

ID setting

Plug the receiver into your notebook’s USB port and turn on the
wireless keypad. Pressing the ID button on the receiver, then the
ID setting is accomplished.

Special Function:

This new keypad has no synchronized problem; users can use the
keypad and inputting characters from a notebook at the same time.
Especially, it doesn’t need any drivers and fully support Plug &
Play.

No matter the Host’s Num Lock function status, users can choose
the Num Key or direction key on the keypad. When users press the
keypad’s Num Lock key once, it can change the keypad’s Num
Lock status. If press the Num Lock key until 0.8 sec, then the
Host’s Num Lock status will be changed. This function is designed

2