Ortek Technology AKP06 User Manual

Wireless Calculator Keypad

User’s Manual

AKP06

0

Federal

Notice 1

Communications Commission Statement

You are cautioned that changes or modifications not
expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment.

Notice 2

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications.

1

Introduction

Congratulations on your purchase of the Wireless Calculator
Mobile Mini Keypad. This new wireless keypad combines

special Tax, Euro and Currency rate calculating functions. It
makes the calculation process more easily and more
convenient.

System Requirements

 Microsoft

®

Windows® 98/Me/2000/XP/Vista compatible

 One USB v. 1.1 or 2.0 Compliant Port

Installation

Connection with Windows

®

98/Me

1. Plug the USB receiver connector to your PC.

2. The Add New Hardware Wizard appears.

3. Click Next. The locate driver screen appears.

4. Select “Search for the best driver for your device.

(Recommended),” and then click Next. The wizard searches

for the appropriate device driver.

5. Click Finish to complete the driver installation.

You are now ready to begin using your wireless keypad.

2

Windows 2000/XP/Vista Operating System

1. Plug the USB receiver connector to your PC.

2. The Found New Hardware Wizard appears and the OS will

install the driver automatically. No other steps are necessary.

You are now ready to begin using your wireless keypad

Using the Wireless Calculator/Keypad

Turning the keypad Off and On

To turn on the keypad, press the CE/AC key, located directly

above the number seven key. The keypad starts in calculator mode

and displays “0”.

The keypad will automatically go to sleep mode after two minutes

of non-operation under calculator mode. You can press CE/AC

key to wake up. Or you can press the CE/AC key for two seconds

to turn off it.

3