Page 1
TABLE
ASSEMBLY INSTRUCTIONS
BEFORE YOU START ASSEMBLING YOUR
FURNITURE:
CHECK THAT YOU HAVE ALL THE
PIECES LISTED ON THE LEFT HAND
SIDE.
LAY A CLEAN SHEET ON A FLAT
SURFACE BIG ENOUGH TO ASSEMBLE
YOUR FURNITURE ON IN ORDER TO
PROTECT YOUR FURNITURE.
A
B
C
D
E
1
1
1
1
11
1.
Lay the table top (A) down so the frame is facing upwards. With the slit facing
upwards, attach chair legs (B), to the table top by aligning the screw holes
with those in the table top (A) . Insert screws (E) through the washer and into
the holes and loosely tighten with the allen key (F).
Then insert table leg (C) into position over the slit of table leg (B) and align the
screw holes with the holes in the table top (A). Insert screws (E) through the
washer and into the holes and loosely tighten with the allen key (F) in the
locations shown in the image below.
F
1
G 1
2.
Attach both the table legs together by placing the bracket (G) over the screw
holes on the bottom of table leg (B & C) as shown in the above image and
inserting the three remaining screws (E) through the washers and into the
bracket and table legs. Fully tighten using the allen key (F).
Fully tighten all of the screws in the table using the allen key (F) then place the
screw caps over all of the screws.
TABLE ASSEMBLY INSTRUCTIONS .
Page 2
3.
Turn the table upright and place the tempered glass (D)
over the table top.
TABLE ASSEMBLY INSTRUCTIONS .
Loading...