Page 1
ASSEMBLY INSTRUCTIONS
base
NOTE:
Before assembling your new lamp,please read the following precautions and
instructions thoroughly.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other)as a
safety feature to reduce the risk of electric shock.This plug will fit in a polarized outlet
one way only.If the plug does not fit fully in the outlet,reverse the plug.If it still does
not fit,contact a qualified electrician.Never use an extension cord unless the plug
can be fully inserted.Do not alter the plug.
The electrical wire is connected continuously through the poles.Do not pull wires during
unpacking,bad connections may result.
Place the lamp indoor dry area only.The lamp produces very high temperature,always unplug
electrical cord and allow sufficient time for bulb to cool down before replacing bulb.
1.Carefully unpack all parts from the packaging and place them on a flat/smooth
surface.Be sure to remove all the packaging materials from the lamp.
*Do not plug into the electrical outlet when installing or replacing bulb
2.Screw the
Spring Washer
Steel Pipe
and the
onto the
Washers
3.Screw tightly the above steps with the provided
4.Link up the Male and female
5.Insert the
6.Place the
the
Light Bulb Sockets
3 Arch Pipe
Shades
into the
onto the tips of the 3 Arch Pipe thruogh .
.
7.Thread the Ring Caps onto the Light Bulbs Sockets through
Shades
the
8.Place the
(LED Bulbs Included)
tightly.
Light bulb
onto the
9.Insert the plug into the wall outlet,you are ready to use .
Metal Base and Marble Base
.
Allen Wrench
Connector
together.
Steel Pipe
and Secure it with the
Light Bulb Socket
with the
.
Screw(A)
Screw B
.
SOCKET
RING CAP
LED BULB
SHADE B
SCREW(B)
SPRING WASHER
SHADE A
SHADE C
3 ARCH PIPE
CONNECTOR
STEEL PIPE
METAL BASE
MARBLE BASE
WASHEK
SCREW(A)
ALLEN WRENCH
Loading...