Page 1
Assembly Instructions
ASSEMBLY RATING
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
EASY
DIFFICULT
Page 1 of 3
Tools Required for Assembly
Allen Wrench
(Included)
Page 2
Page 2 of 3
Page 3
MD
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
Parts List
#1 x 1 pc x 2
Seat
#2 x 1 pc x 2
Leg Stand
Note: The above parts and hardware are shown for a complete assembly of ONE chair. However, the
actual parts and hardware (with an exception of the Allen wrench) in the box will be twice the
quantities listed to include the assembly of the second chair.
I. Insert the seat (#1) into the leg stand (#2). Then insert 2 bolts (#A) through the leg stand (#2)
using the Allen wrench (#B) to lock them with the seat (#1).
II. Make sure the chair is rested on a flat surface and does not feel loose or wobbly . If it does, double
check that the bolts/screws are secured and properly tightened.
#A x 2 pcs
#A x 2 pcs x 2
Bolt 1/4”x1/2”
#B x 1 pc
Allen Wrench
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
Page 3 of 3
Loading...